18 Va. Admin. Code § 145-40-60

Current through Register Vol. 41, No. 6, November 4, 2024

Section 18VAC145-40-60 - Use of seal

A certified professional geologist may apply a rubber stamp or preprinted seal to final and complete cover sheets and to each original sheet of plans or drawings prepared or reviewed and approved by the regulant. The seal may be applied to the cover sheet of technical reports and specifications prepared or reviewed and approved by the regulant.

1. All seal imprints on final documents shall be signed.

2. Application of the seal and signature shall indicate acceptance of responsibility for work shown thereon.

3. The seal shall conform in detail and size to the design illustrated below:

View Image

*The number referred to is the number, usually three or four digits, as shown on the wall certificate and is the license renewal number issued each biennium as indicated on the licensee's pocket card. The number will not change every two years, but is permanent.

18 Va. Admin. Code § 145-40-60

Former 18VAC70-20- derived from VR335-01-2 § 1.7, eff. February 1, 1988; amended, Virginia Register Volume 7, Issue 13, eff. April 24, 1991; Volume 11, Issue 6, eff. February 1, 1995; Volume 22, Issue 21, eff. August 1, 2006; amended and renumbered as 18VAC145-40-, Virginia Register Volume 28, Issue 23, eff. August 15, 2012.

Statutory Authority

§ 54.1-201 of the Code of Virginia.