Section R920-50-14 - Modification of a Ropeway(1) The Committee, or its appointed representative will determine the certifications that will be required.(2) Depending on the nature and extent of the modification the Committee, or its appointed representative may require an Acceptance Inspection and Test.(3) The following certifications may be required: design; construction, and an as-built profile.(4) The certifications must be submitted by a qualified engineer and attached to the cover of the modification documents. The modification documents must include the drawings, descriptions, or specifications pertaining to the affected systems and their connections with existing systems.(5) A revised lift data form must be submitted.(6) The ropeway must not resume operating until authorized by the Committee, or its appointed representative.Utah Admin. Code R920-50-14
Amended by Utah State Bulletin Number 2017-21, effective 10/10/2017Amended by Utah State Bulletin Number 2019-5, effective 2/7/2019Amended by Utah State Bulletin Number 2022-20, effective 10/10/2022