Section R909-2-26 - Overweight Non-Divisible Loads Exceeding 125,000 Pounds Gross or Axle Weights(1) Loads exceeding 125,000 pounds gross, or axle weights in Section R909-2-24 may only purchase single trip permits.(2) Axle, bridge, and gross weight allowances will be determined based on the non-divisible bridge table formula ~1.47 x 500 (LN/N-1 + 12N + 36) or in accordance with the bridge table.(3) 9-foot-wide axles are allowed 7.5% more weight than 8-foot-wide axles.(4) 10 feet wide axles are allowed 15% more weight than 8 feet wide axles.(5) If using an axle equipped with eight tires, rather than four, add 10% to the weight authorized for an 8-foot-wide axle group.(6) Tires must comply with the manufacturer's tire load rating as indicated on the tire side wall.(7) STE operations must have an STE profile sheet if the axle limitations specified in Table 3, or the bridge table are exceeded.Utah Admin. Code R909-2-26
Amended by Utah State Bulletin Number 2017-21, effective 10/10/2017Amended by Utah State Bulletin Number 2019-1, effective 12/12/2018Amended by Utah State Bulletin Number 2020-02, effective 12/31/2019Amended by Utah State Bulletin Number 2023-02, effective 1/10/2023Amended by Utah State Bulletin Number 2024-21, effective 10/22/2024