Section R698-13-9 - Compliance Timeline for Safety and Security Standards(1) Each school must comply with the safety and security standards under Sections R698-13-4 through R698-13-8; (a) by school year 2034-2035 for limited entry points, ground level windows protected by security film or ballistic windows, and fencing playgrounds; and(b) by school year 2029-2030 for video surveillance of entrances when school is in session, internal classroom door locks, bleed kits and first aid kits, and exterior cameras on entrances, parking areas, and campus grounds.(2) If a school fails to comply with the safety and security standards described under Subsection R698-13-9(1), the State Security Chief shall:(a) consult with the local governing board regarding compliance issues;(b) establish a plan and timeline to remedy compliance issues; and(c) if compliance issues are not remedied under Subsection R698-13-9(2)(b), recommend to the Commissioner the denial or revocation of the school's occupancy permit under Section 53-1-108.Utah Admin. Code R698-13-9
Adopted by Utah State Bulletin Number 2025-01, effective 12/23/2024