Utah Admin. Code 649-8-1

Current through Bulletin 2024-20, October 15, 2024

Section R649-8-1 - General Report Forms

1. The forms listed below, as modified by the Division from time to time shall be used for the purpose indicated in accordance with the instructions and the applicable rule.

Form 1 Application for Permit to Conduct Seismic Exploration R649-8-2

Form 2 Seismic Exploration Completion Report R649-8-3

Form 3 Application for Permit to Drill, Deepen, or Plug Back (APD) R649-8-4

Form 4 Bond R649-8-5

Form 5 Designation of Agent or Operator R649-8-6

Form 6 Entity Action Form R649-8-7

Form 7 Report of Water Encountered During Drilling R649-8-8

Form 8 Well Completion or Recompletion Report and Log R649-8-9

Form 9 Sundry Notices and Reports on Wells R649-8-10

Form 10 Monthly Oil and Gas Production Report R649-8-11

Form 11 Monthly Oil and Gas Disposition Report R649-8-12

Form 12 Report of Transferred Oil R649-8-13

Form 13-A Monthly Summary Report of Gas Processing Plant Operations R649-8-14

Form 13-B Monthly Report of Gas Processing Plant Product Allocations R649-8-15

Form 14 Monthly Report of Waste Crude Oil Treatment Facility Operations R649-8-16

Form 15 Designation of Workover or Recompletion R649-8-17

UIC Form 1 Application for Injection Well R649-8-18

UIC Form 2 Monthly Report of Enhanced Recovery Project R649-8-19

UIC Form 3 Monthly Injection Report R649-8-20

UIC Form 4 Annual Fluid Injection Report R649-8-21

UIC Form 5 Transfer of Authority to Inject R649-8-22

2. Any permitted well which is referenced on a report form, correspondence, or well log should be identified by its assigned API number.

Utah Admin. Code R649-8-1