Section R392-501-10 - Toilet and Bath Requirements(1)(a) The operator shall ensure that each of the following plumbing fixtures is available to each labor community occupant: (ii) a shower or bath fixture; and(iii) a hand sink installed at a ratio of one per six workers in a convenient location, as approved by the local health officer.(b) The number of toilet fixtures or privy seats provided for each gender shall be based on the maximum number of workers of that gender which the labor community is designed to house at any one time, and shall be calculated from Table 1.(c) The number of shower or bathing facilities provided for each gender shall be based on the maximum number of workers of that gender which the labor community is designed to house at any one time, and shall be calculated from Table 2.(2) If a toilet or bath fixture is located within a housing unit, the toilet or bath area shall be provided with: (a) a window not less than six square feet in area opening directly to the outside area; or(b) mechanical ventilation. (3) The operator shall ensure that each toilet facility, toilet room, and bathroom is easily cleanable and maintained in a clean and sanitary condition.Utah Admin. Code R392-501-10
Adopted by Utah State Bulletin Number 2018-19, effective 9/10/2018Amended by Utah State Bulletin Number 2022-06, effective 3/10/2022