Utah Admin. Code 315-310-7

Current through Bulletin No. 2024-21, November 1, 2024

Section R315-310-7 - Contents of a Permit Application for a New or Expanding Incinerator Facility

(1) Each application for a new or expanding incinerator facility permit shall contain the information required in Section R315-310-3.

(2) Each application for a permit shall also contain:

(a) engineering report, plans, specifications, and calculations that address:

(i) the design of the storage and handling facilities on-site for incoming waste as well as fly ash, bottom ash, and any other wastes produced by air or water pollution controls; and

(ii) the design of the incinerator or thermal treater, including charging or feeding systems, combustion air systems, combustion or reaction chambers, including heat recovery systems, ash handling systems, and air pollution and water pollution control systems. Instrumentation and monitoring systems design shall also be included;

(b) an operational plan that, in addition to the requirements of Section R315-302-2, addresses:

(i) cleaning of storage areas as required by Subsection R315-306-2(5);

(ii) alternative storage plans for breakdowns as required in Subsection R315-306-2(3);

(iii) inspections to ensure compliance with state and local air pollution laws and to comply with Subsection R315-302-2(5)(a). The inspection log or summary shall be submitted with the application;

(iv) how and where the fly ash, bottom ash, and other solid waste will be disposed; and

(v) a program for excluding the receipt of hazardous waste equivalent to requirements specified in Subsection R315-303-4(7);

(c) documentation to show that air pollution and water pollution control systems are being reviewed or have been reviewed by the Division of Air Quality and the Division of Water Quality;

(d) a closure plan to address:

(i) closure schedule;

(ii) closure costs and a financial assurance mechanism to cover the closure costs;

(iii) methods of closure and methods of removing wastes, equipment, and location of final disposal; and

(iv) final inspection by regulatory agencies.

Utah Admin. Code R315-310-7

Amended by Utah State Bulletin Number 2024-12, effective 6/17/2024