Section R315-273-35 - Standards for Universal Waste Management, Standards for Large Quantity Handlers of Universal Waste - Accumulation Time Limits(a) A large quantity handler of universal waste may accumulate universal waste for no longer than one year from the date the universal waste is generated, or received from another handler, unless the requirements of Subsection R315-273-35(b) are met.(b) A large quantity handler of universal waste may accumulate universal waste for longer than one year from the date the universal waste is generated, or received from another handler, if such activity is solely for the purpose of accumulation of such quantities of universal waste as necessary to facilitate proper recovery, treatment, or disposal. However, the handler bears the burden of proving that such activity was solely for the purpose of accumulation of such quantities of universal waste as necessary to facilitate proper recovery, treatment, or disposal.(c) A large quantity handler of universal waste shall be able to demonstrate the length of time that the universal waste has been accumulated from the date it becomes a waste or is received. The handler may make this demonstration by: (1) Placing the universal waste in a container and marking or labeling the container with the earliest date that any universal waste in the container became a waste or was received;(2) Marking or labeling the individual item of universal waste, e.g., each battery or thermostat, with the date it became a waste or was received;(3) Maintaining an inventory system on-site that identifies the date the universal waste being accumulated became a waste or was received;(4) Maintaining an inventory system on-site that identifies the earliest date that any universal waste in a group of universal waste items or a group of containers of universal waste became a waste or was received;(5) Placing the universal waste in a specific accumulation area and identifying the earliest date that any universal waste in the area became a waste or was received; or(6) Any other method which clearly demonstrates the length of time that the universal waste has been accumulated from the date it becomes a waste or is received.Utah Admin. Code R315-273-35
Adopted by Utah State Bulletin Number 2016-9, effective 4/15/2016