Section R315-265-229 - Surface Impoundments - Special Requirements for Ignitable or Reactive WasteIgnitable or reactive waste shall not be placed in a surface impoundment, unless the waste and impoundment satisfy all applicable requirements of Rule R315-268, and:
(a) The waste is treated, rendered, or mixed before or immediately after placement in the impoundment so that: (1) The resulting waste, mixture, or dissolution of material no longer meets the definition of ignitable or reactive waste under Sections R315-261-21 or R315-261-23; and(2) Subsection R315-265-17(b) is complied with; or(b)(1) The waste is managed in such a way that it is protected from any material or conditions which may cause it to ignite or react; and(2) The owner or operator obtains a certification from a qualified chemist or engineer that, to the best of his knowledge and opinion, the design features or operating plans of the facility will prevent ignition or reaction; and(3) The certification and the basis for it are maintained at the facility; or(c) The surface impoundment is used solely for emergencies.Utah Admin. Code R315-265-229
Adopted by Utah State Bulletin Number 2019-21, effective 10/15/2019