Section R315-264-347 - Monitoring and Inspections(a) The owner or operator shall conduct, as a minimum, the following monitoring while incinerating hazardous waste: (1) Combustion temperature, waste feed rate, and the indicator of combustion gas velocity specified in the facility permit shall be monitored on a continuous basis. (2) Carbon monoxide shall be monitored on a continuous basis at a point in the incinerator downstream of the combustion zone and prior to release to the atmosphere. (3) Upon request by the Director, sampling and analysis of the waste and exhaust emissions shall be conducted to verify that the operating requirements established in the permit achieve the performance standards of Section R315-264-343. (b) The incinerator and associated equipment, pumps, valves, conveyors, pipes, etc., shall be subjected to thorough visual inspection, at least daily, for leaks, spills, fugitive emissions, and signs of tampering. (c) The emergency waste feed cutoff system and associated alarms shall be tested at least weekly to verify operability, unless the applicant demonstrates to the Director that weekly inspections will unduly restrict or upset operations and that less frequent inspection will be adequate. At a minimum, operational testing shall be conducted at least monthly. (d) This monitoring and inspection data shall be recorded and the records shall be placed in the operating record required by Section R315-264-73 and maintained in the operating record for five years. Utah Admin. Code R315-264-347
Adopted by Utah State Bulletin Number 2016-9, effective 4/15/2016