Many hazardous wastes, when mixed with other waste or materials at a hazardous waste facility, can produce effects which are harmful to human health and the environment, such as (1) heat or pressure, (2) fire or explosion, (3) violent reaction, (4) toxic dusts, mists, fumes, or gases, or (5) flammable fumes or gases.
Below are examples of potentially incompatible wastes, waste components, and materials, along with the harmful consequences which result from mixing materials in one group with materials in another group. The list is intended as a guide to owners or operators of treatment, storage, and disposal facilities, and to enforcement and permit granting officials, to indicate the need for special precautions when managing these potentially incompatible waste materials or components.
This list is not intended to be exhaustive. An owner or operator shall, as the regulations require, adequately analyze his wastes so that he can avoid creating uncontrolled substances or reactions of the type listed below, whether they are listed below or not.
It is possible for potentially incompatible wastes to be mixed in a way that precludes a reaction, e.g., adding acid to water rather than water to acid, or that neutralizes them, e.g., a strong acid mixed with a strong base, or that controls substances produced, e.g., by generating flammable gases in a closed tank equipped so that ignition cannot occur, and burning the gases in an incinerator.
In the lists below, the mixing of a Group A material with a Group B material may have the potential consequence as noted.
Table
Group 1-A Acetylene sludge Alkaline caustic liquids Alkaline cleaner Alkaline corrosive liquids Alkaline corrosive battery fluid Caustic wastewater Lime sludge and other corrosive alkalies Lime wastewater Lime and water Spent caustic Group 1-B Acid sludge Acid and water Battery acid Chemical cleaners Electrolyte, acid Etching acid liquid or solvent Pickling liquor and other corrosive acids Spent acid Spent mixed acid Spent sulfuric acid Potential consequences: Heat generation; violent reaction. Group 2-A Aluminum Beryllium Calcium Lithium Magnesium Potassium Sodium Zinc powder Other reactive metals and metal hydrides Group 2-B Any waste in Group 1-A or 1-B Potential consequences: Fire or explosion; generation of flammable hydrogen gas. Group 3-A Alcohols Water Group 3-B Any concentrated waste in Groups 1-A or 1-B Calcium Lithium Metal hydrides Potassium SO2 Cl2, SOCl2, PCl3, CH3 SiCl3 Other water-reactive waste Potential consequences: Fire, explosion, or heat generation; generation of flammable or toxic gases. Group 4-A Alcohols Aldehydes Halogenated hydrocarbons Nitrated hydrocarbons Unsaturated hydrocarbons Other reactive organic compounds and solvents Group 4-B Concentrated Group 1-A or 1-B wastes Group 2-A wastes Potential consequences: Fire, explosion, or violent reaction. Group 5-A Spent cyanide and sulfide solutions Group 5-B Group 1-B wastes Potential consequences: Generation of toxic hydrogen cyanide or hydrogen sulfide gas. Group 6-A Chlorates Chlorine Chlorites Chromic acid Hypochlorites Nitrates Nitric acid, fuming Perchlorates Permanganates Peroxides Other strong oxidizers Group 6-B Acetic acid and other organic acids Concentrated mineral acids Group 2-A wastes Group 4-A wastes Other flammable and combustible wastes Potential consequences: Fire, explosion, or violent reaction. Source: "Law, Regulations, and Guidelines for Handling of Hazardous Waste." California Department of Health, February 1975. 1These include counties, city-county consolidations, and independent cities. In the case of Alaska, the political jurisdictions are election districts, and, in the case of Hawaii, the political jurisdiction listed is the island of Hawaii.Utah Admin. Code R315-264-1105