Utah Admin. Code 315-262-32

Current through Bulletin No. 2024-21, November 1, 2024
Section R315-262-32 - Pre-Transport Requirements Applicable to Small and Large Quantity Generators - Marking
(a) Before transporting or offering hazardous waste for transportation off-site, a generator shall mark each package of hazardous waste in accordance with the applicable Department of Transportation regulations on hazardous materials under 49 CFR part 172;
(b) Before transporting hazardous waste or offering hazardous waste for transportation off site, a generator shall mark each container of 119 gallons or less used in such transportation with the following words and information in accordance with the requirements of 49 CFR 172.304:
(1) HAZARDOUS WASTE-Federal Law Prohibits Improper Disposal. If found, contact the nearest police or public safety authority or the U.S. Environmental Protection Agency.
(2) Generator's Name and Address ____.
(3) Generator's EPA Identification Number ____.
(4) Manifest Tracking Number ____.
(5) EPA Hazardous Waste Number(s) ____.
(c) A generator may use a nationally recognized electronic system, such as bar coding, to identify the EPA Hazardous Waste Number(s), as required by Subsection R315-262-32(b)(5) or paragraph (d).
(d) Lab packs that will be incinerated in compliance with Subsection R315-268-42(c) are not required to be marked with EPA Hazardous Waste Number(s), except D004, D005, D006, D007, D008, D010, and D011, where applicable.

Utah Admin. Code R315-262-32

Adopted by Utah State Bulletin Number 2016-9, effective 4/15/2016
Amended by Utah State Bulletin Number 2017-17, effective 8/31/2017