Section R315-261-39 - Exclusions and Exemptions - Conditional Exclusion for Used, Broken Cathode Ray Tubes (CRTs) and Processed CRT Glass Undergoing RecyclingUsed, broken CRTs are not solid wastes if they meet the following conditions:
(a) Before processing. These materials are not solid wastes if they are destined for recycling and if they meet the following requirements: (1) Storage. The broken CRTs shall be either: (i) stored in a building with a roof, floor, and walls, or(ii) placed in a container, for example, a package or a vehicle, that is constructed, filled, and closed to minimize releases to the environment of CRT glass, including fine solid materials.(2) Labeling. Each container in which the used, broken CRT is contained shall be labeled or marked clearly with one of the following phrases: "Used cathode ray tube(s)-contains leaded glass " or "Leaded glass from televisions or computers." It shall also be labeled: "Do not mix with other glass materials."(3) Transportation. The used, broken CRTs shall be transported in a container meeting the requirements of Subsections R315-261-39(a)(1)(ii) and R315-261-39(a)(2).(4) Speculative accumulation and use constituting disposal. The used, broken CRTs are subject to the limitations on speculative accumulation as defined in Subsection R315-261-39(c)(8). If they are used in a manner constituting disposal, they shall comply with the applicable requirements of Sections R315-266-20 through R315-266-23 instead of the requirements of Section R315-261-39.(5) Exports. In addition to the applicable conditions specified in Subsections R315-261-39(a)(1) through R315-261-39(a)(4), exporters of used, broken CRTs shall comply with the following requirements: (i) Notify EPA of an intended export before the CRTs are scheduled to leave the United States. A complete notification should be submitted 60 days before the initial shipment is intended to be shipped off site. This notification may cover export activities extending over a 12 month or lesser period. The notification shall be in writing, signed by the exporter, and include the following information: (A) Name, mailing address, telephone number and EPA ID number, if applicable, of the exporter of the CRTs.(B) The estimated frequency or rate at which the CRTs are to be exported and the period over which they are to be exported.(C) The estimated total quantity of CRTs specified in kilograms.(D) The points of entry to and departure from each foreign country through which the CRTs will pass.(E) A description of the means by which each shipment of the CRTs will be transported; such as mode of transportation vehicle, air, highway, rail, water; types of container, drums, boxes, tanks.(F) The name and address of the recycler or recyclers and the estimated quantity of used CRTs to be sent to each facility, as well as the names of any alternate recyclers.(G) A description of the manner in which the CRTs will be recycled in the foreign country that will be receiving the CRTs.(H) The name of any transit country through which the CRTs will be sent and a description of the approximate length of time the CRTs will remain in the transit country and the nature of their handling while there.(ii) Notifications shall be submitted electronically using EPA's Waste Import Export Tracking System (WIETS), or its successor system.(iii) Upon request by EPA, the exporter shall furnish to EPA any additional information that a receiving country requests to respond to a notification.(iv) EPA shall provide a complete notification to the receiving country and any transit countries. A notification is complete when EPA receives a notification that E P A determines satisfies the requirements of Subsection R315-261-39(a)(5)(i).(v) The export of CRTs is prohibited unless each of the following occur:(A) The receiving country consents to the intended export. When the receiving country consents in writing to the receipt of the CRTs, EPA will forward an Acknowledgment of Consent to Export CRTs to the exporter. If the receiving country objects to receipt of the CRTs or withdraws a earlier consent, EPA will notify the exporter in writing. EPA will also notify the exporter of any responses from transit countries.(B) On or after the AES filing compliance date, the exporter or a U.S. authorized agent shall: (I) Submit Electronic Export Information (EEI) for each shipment to the Automated Export System (AES) or its successor system, under the International Trade Data System (ITDS) platform, in accordance with 15 CFR 30.4(b).(II) Include the following items in the EEI, along with the other information required under 15 CFR 30.6: EPA license code; Commodity classification code per 15 CFR 30.6(a)(12); EPA consent number; Country of ultimate destination per 15 CFR 30.6(a)(5); Date of export per 15 CFR 30.6(a)(2); Quantity of waste in shipment and units for reported quantity, if required reporting units established by value for the reported commodity classification number are in units of weight or volume per 15 CFR 30.6(a)(15); or EPA net quantity reported in units of kilograms, if required reporting units established by value for the reported commodity classification number are not in units of weight or volume.(vi) If the conditions specified on the original notification change, the exporter shall provide EPA with a written renotification of the change using the allowable methods listed in Subsection R315-261-39(a)(5)(ii), except for changes to the telephone number in Subsection R315-261-39(a)(5)(i)(A) and decreases in the quantity indicated pursuant to Subsection R315-261-39(a)(5)(i)(C). The shipment cannot take place until consent of the receiving country to the changes has been received, except for changes to information about points of entry and departure and transit countries pursuant to Subsections R315-261-39(a)(5)(i)(D) and R315-261-39(a)(5)(i)(H) and the exporter of CRTs receives from EPA a copy of the Acknowledgment of Consent to Export CRTs reflecting the receiving country's consent to the changes.(vii) A copy of the Acknowledgment of Consent to Export CRTs shall accompany the shipment of CRTs. The shipment shall conform to the terms of the Acknowledgment.(viii) If a shipment of CRTs cannot be delivered for any reason to the recycler or the alternate recycler, the exporter of CRTs shall renotify EPA of a change in the conditions of the original notification to allow shipment to a new recycler in accordance with Subsection R315-261-39(a)(5)(vi) and get another Acknowledgment of Consent to Export CRTs.(ix) Exporters shall keep copies of notifications and Acknowledgments of Consent to Export CRTs for a period of three years following receipt of the Acknowledgment. Exporters may satisfy this recordkeeping requirement by keeping electronically submitted notifications or electronically generated Acknowledgements in the CRT exporter's account on EPA's Waste Import Export Tracking System (WIETS), or its successor system, if these copies are readily available for viewing and production if requested by any EPA or authorized state inspector. No CRT exporter may be held liable for the inability to produce a notification or Acknowledgement for inspection under Section R315-261-39 if the CRT exporter can demonstrate that the inability to produce copies is due exclusively to technical difficulty with EPA's Waste Import Export Tracking System (WIETS), or its successor system for which the CRT exporter bears no responsibility.(x) CRT exporters shall file with EPA no later than March 1 of each year, an annual report summarizing the quantities, in kilograms; frequency of shipment; and ultimate destinations, for example, the facility or facilities where the recycling occurs, of the used CRTs exported during the previous calendar year. Annual reports shall also include the following: (A) the name; EPA ID number, if applicable; and mailing and site address of the exporter;(B) the calendar year covered by the report; and(C) a certification signed by the CRT exporter that states: "I certify under penalty of law that I have personally examined and am familiar with the information submitted in this and all attached documents and that, based on my inquiry of those individuals immediately responsible for obtaining this information, I believe that the submitted information is true, accurate, and complete. I am aware that there are significant penalties for submitting false information, including the possibility of fine and imprisonment."
(xi) Before one year after the AES filing compliance date, annual reports shall be sent to the following mailing address: Office of Land and Emergency Management, Office of Resource Conservation and Recovery, Materials Recovery and Waste Management Division, International Branch, (Mail Code 2255A), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460. Hand-delivered annual reports on used CRTs exported during 2016 should be sent to: Office of Land and Emergency Management, Office of Resource Conservation and Recovery, Materials Recovery and Waste Management Division, International Branch, (Mail Code 2255A), Environmental Protection Agency, William Jefferson Clinton South Building, Room 6144, 1200 Pennsylvania Ave. NW., Washington, DC 20004. Subsequently, annual reports shall be submitted to the office listed using the allowable methods specified in Subsection R315-261-39(a)(5)(ii). Exporters shall keep copies of each annual report for a period of at least three years from the due date of the report. Exporters may satisfy this recordkeeping requirement by keeping electronically submitted annual reports in the CRT exporter's account on EPA's Waste Import Export Tracking System (WIETS), or its successor system, if a copy is readily available for viewing and production if requested by any EPA or authorized Utah inspector. No CRT exporter may be held liable for the inability to produce an annual report for inspection under Section R315-261-39 if the CRT exporter can demonstrate that the inability to produce the annual report is due exclusively to technical difficulty with EPA's Waste Import Export Tracking System (WIETS), or its successor system for which the CRT exporter bears no responsibility.(b) Requirements for used CRT processing: Used, broken CRTs undergoing CRT processing as defined in Section R315-260-10 are not solid wastes if they meet the following requirements: (1) Storage. Used, broken CRTs undergoing processing are subject to the requirement of Subsection R315-261-39(a)(4).(2) Processing. (i) The activities specified in Subsections R315-260-10(32)(ii) and R315-260-10(32)(iii) of the definition of CRT Processing in Section R315-260-10 shall be performed within a building with a roof, floor, and walls; and(ii) No activities may be performed that use temperatures high enough to volatilize lead from CRTs.(c) Processed CRT glass sent to CRT glass making or lead smelting: Glass from used CRTs that is destined for recycling at a CRT glass manufacturer or a lead smelter after processing is not a solid waste unless it is speculatively accumulated as defined in Subsection R315-261-1(c)(8).(d) Use constituting disposal. Glass from used CRTs that is used in a manner constituting disposal shall comply with the requirements of Sections R315-266-20 through R315-266-23 instead of the requirements of Section R315-261-39.Utah Admin. Code R315-261-39
Adopted by Utah State Bulletin Number 2016-9, effective 4/15/2016Amended by Utah State Bulletin Number 2016-13, effective 6/10/2016Amended by Utah State Bulletin Number 2019-21, effective 10/15/2019Amended by Utah State Bulletin Number 2023-03, effective 1/17/2023