Section R315-15-6 - Standards for Used Oil Burners Who Burn Used Oil for Energy Recovery6.1 APPLICABILITY (a) General. A used oil burner is a person who burns used oil for energy recovery. An on-specification used oil burner is a person who only burns used oil that meets the specifications of R315-15-1.2. U sed oil that has not been determined to be on-specification used oil by a Utah-registered marketer shall be managed as off-specification used oil except as described R315-15-2.4. An off-specification used oil burner is a person who burns used oil not meeting the specifications found in R315-15-1.2 for energy recovery. Facilities burning used oil for energy recovery under the following conditions are subject to R 315-15-6.1(a) and (b) and R315-15-6.2(b) and (c), but not other portions of R315-15-6: (1) The used oil is burned by the generator in an on-site space heater under the provisions of R315-15-2.4;(2) The used oil is burned by a processor/re-refiner for purposes of processing used oil, which is considered burning incidentally to used oil processing; or(3) The used oil burned by the facility is obtained from a Utah-registered marketer who claims and has demonstrated that the used oil meets the used oil fuel specifications set forth in R315-15-1.2 and who delivers the used oil in the manner set forth in R315-15-7.5(b).(b) Other applicable provisions. In addition to the requirements of R315-15-6.1(a), used oil burners who conduct the following activities are subject to the requirements of R315-15 as indicated below. (1) Burners who generate used oil shall comply with R315-15-2;(2) Burners who transport used oil shall comply with R315-15-4;(3) Except as provided in R315-15-6.2(b)(2), burners who process or re-refine used oil shall comply with Section R315-15-5;(4) Burners who direct shipments of off-specification used oil from their facility to an off-specification used oil burner or first claim that used oil that is to be burned for energy recovery meets the used oil fuel specifications set forth in R315-15-1.2 shall comply with R315-15-7 and R315-15-13.7;(5) Burners who dispose of used oil shall comply with R315-15-8; and(6) Burners who collect used oil shall also comply with the collection center requirements in R315-15-3. Burners may only burn used oil collected from other generators if that used oil has been certified to be on-specification used oil by a Utah-registered used oil marketer in compliance with R315-15-7. Burners who collect and burn used oil that is not "do-it-yourselfer" or farmer-generated as described in R315-15-2.1(a)(1) and (4), shall obtain a used oil marketer registration before burning such oil and shall comply with the provisions of R315-15-7.(7) Tanks, containers, and piping that previously contained listed hazardous waste. Unless tanks, containers, and piping that previously contained listed hazardous waste are decontaminated as described in R315-2-7 prior to storing used oil, the used oil is considered to have been mixed with the hazardous waste and shall be managed as hazardous waste unless, under the provisions of R315-15-1.1(b), the hazardous waste and used oil mixture is determined not to be hazardous waste.(8) Tanks, containers, and piping that previously contained PCB-contaminated material. Unless tanks, containers, and piping that previously contained PCB-contaminated material are decontaminated as described in 40 CFR 761 Subpart S prior to transfer of used oil, the used oil is considered to have been mixed with the PCB-contaminated material and shall be managed as PCB-contaminated material in accordance with R315-15-18.(c) Off-specification used oil burner permit. Off-specification used oil burners shall obtain a permit from the Director prior to burning off-specification used oil unless exempted by R315-15-13.6(b)(5). An application for a permit shall contain the information required by R315-15-13.6(b). Off-specification used oil burners shall also obtain a used oil handler certificate in accordance with R315-15-13.8.(d) Testing of used oil fuel for PCBs. Used oil to be burned for energy recovery is presumed to contain quantifiable levels, 2 ppm or greater, of PCBs unless a used oil marketer obtains laboratory analyses that the used oil fuel does not contain quantifiable levels of PCBs. The person who first claims that the used oil fuel does not contain a quantifiable level of PCBs shall obtain analyses or other information to support the claim, as described in R315-15-18. 6.2 RESTRICTIONS ON BURNING (a) Off-specification used oil fuel may be burned for energy recovery in only the following devices: (1) Industrial furnaces identified in R315-1-1(b), which incorporates by reference 40 CFR 260.10;(2) Boilers, as defined in R315-1-1(b), which incorporates by reference 40 CFR 260.10, that are identified as follows: (i) Industrial boilers located on the site of a facility engaged in a manufacturing process where substances are transformed into new products, including the component parts of products, by mechanical or chemical processes;(ii) Utility boilers used to produce electric power, steam, heated or cooled air, or other gases or fluids for sale;(iii) Used oil-fired space heaters provided that the burner meets the provisions of R315-15-2.4; or(3) Hazardous waste incinerators subject to regulation under R315-7-22 or R315-8-15.(b)(1) With the exception of the aggregation activity described in R315-15-6.2(b)(2), used oil burners may not process used oil unless they also comply with R315-15-5.(2) Off-specification used oil burners may aggregate off-specification used oil with virgin oil or on-specification used oil for purposes of burning, but may not aggregate for purposes of marketing on-specification used oil without also complying with the processor/re-refiner requirements in R315-15-5.(c) Burning of hazardous waste. Used oil burners may only burn hazardous waste if they are permitted to do so by the Director.6.3 NOTIFICATION FOR OFF-SPECIFICATION USED OIL BURNERS(a) Identification numbers. Off-specification used oil burners who have not previously complied with the notification requirements of RCRA section 3010 shall comply with these requirements and obtain an EPA identification number.(b) Mechanics of notification. An off-specification used oil burner who has not received an EPA identification number may obtain one by notifying the Director of their used oil activity by submitting either:(1) A completed EPA Form 8700-12.; or(2) A letter to the Director requesting an EPA identification number. The letter shall include the following information:(ii) Owner of the burner company; (iii) Mailing address for the burner; (iv) Name and telephone number for the burner point of contact;(v) Type of used oil activity; and (vi) Location of the burner facility.6.4 REBUTTABLE PRESUMPTION FOR USED OIL (a) To ensure that used oil managed at a used oil burner facility is not hazardous waste under the rebuttable presumption of Subsection R315-15-1.1(b)(1)(ii), a used oil burner shall determine whether the total halogen content of used oil managed at the facility is above or below 1,000 ppm.(b) The used oil burner shall determine if the used oil contains above or below 1,000 ppm total halogens by(1) Testing the used oil;(2) Applying documented generator knowledge of the halogen content of the used oil in light of the materials or processes used; or(3) Using information provided by the processor/re-refiner, if the used oil has been received from a processor/re-refiner subject to regulation under R315-15-5.(c) If the used oil contains greater than or equal to 1,000 ppm total halogens, it is presumed to be a hazardous waste because it has been mixed with halogenated hazardous waste listed in R315-2-10. The owner or operator may rebut the presumption by demonstrating that the used oil does not contain hazardous waste, for example, by using an analytical method from SW-846, Edition III update IV, to show that the used oil does not contain significant concentrations of halogenated hazardous constituents listed in R315-50-10, which incorporates by reference 40 CFR 261 Appendix VIII. (1) The rebuttable presumption does not apply to metalworking oils/fluids containing chlorinated paraffins, if they are processed through a tolling arrangement, as described in R315-15-2.5(c), to reclaim metalworking oils/fluids. The presumption does apply to metalworking oils/fluids if such oils/fluids are recycled in any other manner or disposed.(2) The rebuttable presumption does not apply to used oils contaminated with chlorofluorocarbons (CFCs) removed from refrigeration units where the CFCs are destined for reclamation. The rebuttable presumption does apply to used oils contaminated with CFCs that have been mixed with used oil from sources other than refrigeration units.(d) Record retention. Records of analyses conducted or information used to comply with R315-15-6.4(a), (b), and (c) shall be maintained at the burner facility or another facility approved by the Director for at least 3 years.6.5 USED OIL STORAGE AT OFF-SPECIFICATION USED OIL BURNER FACILITIES Off-specification used oil burners are subject to all applicable Spill Prevention, Control and Countermeasures, 40 CFR part 112, in addition to the requirements of R315-15-6. Used oil burners are also subject to the standards and requirements of R311-200 through R311-209, Underground Storage Tanks, for used oil stored in underground tanks whether or not the used oil exhibits any characteristics of hazardous waste, in addition to the requirements of R315-15-6.
(a) Storage units. Off-specification used oil burners may not store used oil in units other than tanks, containers or units subject to regulation under R315-7 and R315-8.(b) Condition of units. Containers and aboveground tanks used to store oil at off-specification used oil burner facilities shall be:(1) In good condition, with no severe rusting, apparent structural defects, or deterioration; and(c) Secondary containment. Containers and aboveground tanks used to store off-specification used oil at burner facilities, including their pipe connections and valves, shall be equipped with a secondary containment system. (1) The secondary containment system shall consist of:(i) Dikes, berms, or retaining walls; and(ii) A floor. The floor shall cover the entire area within the dike, berm, or retaining wall, except areas where existing portions of aboveground tanks meet the ground.(iii) Other equivalent secondary containment approved by the Director.(2) The entire containment system, including walls and floor, shall be of sufficient extent and sufficiently impervious to used oil to prevent any used oil released into the containment system from migrating out of the system to the soil, groundwater, or surface water.(3) Any accumulation of water, used oil, or other liquid shall be removed from secondary containment within 24 hours of discovery.(4) Used oil shall not be stored or allowed to accumulate in sumps and similar water-containment structures at the facility. Any used oil in sumps and similar water-containment structures shall be removed within 24 hours of its discovery.(d) Labels. (1) Containers and aboveground tanks used to store off-specification used oil at burner facilities shall be labeled or marked clearly with the words "Used Oil."(2) Fill pipes used to transfer off-specification used oil into underground storage tanks at burner facilities shall be labeled or marked clearly with the words "Used Oil."(e) Response to releases. Upon detection of a release of used oil to the environment not subject to the requirements of R311-202-1, a burner shall comply with R315-15-9.6.6 TRACKING FOR OFF-SPECIFICATION USED OIL FACILITIES(a) Acceptance. Off-specification used oil burners shall keep a record of each off-specification used oil shipment accepted for burning. These records may take the form of a log, invoice, manifest, bill of lading, or other shipping documents. Records for each shipment shall include the following information: (1) The name and address of the transporter who delivered the used oil to the burner;(2) The name and address of the generator or processor/re-refiner from whom the used oil was sent to the burner;(3) The EPA identification number of the transporter who delivered the used oil to the burner;(4) The EPA identification number, if applicable, of the generator or processor/re-refiner from whom the used oil was sent to the burner;(5) The quantity of used oil accepted;(6) The date of acceptance; and(7) Documentation demonstrating that the transporter has met the rebuttable presumption requirements of R315-15-6.4 and, where applicable, the PCB testing requirements of R315-15-18;(b) Record retention. The records described in paragraph (a) of this section shall be maintained for at least three years.6.7 NOTICES (a) Certification. Before a burner accepts the first shipment of off-specification used oil fuel from a generator, transporter, or processor/re-refiner, the burner shall provide to the generator, transporter, or processor/re-refiner a one-time written and signed notice certifying that:(1) The burner has notified the Director of the location and general description of the burner's used oil management activities; and(2) The burner will burn the off-specification used oil only in an industrial furnace or boiler identified in R315-15-6.2(a).(b) Certification retention. The certification described in R315-15-6.7(a) shall be maintained, at the permitted facility or other location approved by the Director, for three years from the date the burner last receives shipment of off-specification used oil from that generator, transporter, or processor/re-refiner.6.8 MANAGEMENT OF RESIDUES AT OFF-SPECIFICATION USED OIL BURNER FACILITIES Off-specification used oil burners who generate residues from the storage or burning of used oil shall manage the residues as specified in R315-15-1.1(e).
6.9 ACCEPTANCE OF OFF-SITE USED OIL O ff-specification used oil burners accepting used oil from off-site shall ensure that transporters delivering used oil to their facility have obtained a current used oil transporter permit and an EPA identification number.Utah Admin. Code R315-15-6
Amended by Utah State Bulletin Number 2014-21, effective 10/3/2014