Section R311-212-7 - Procedure for Making Loans(1) Loan funds shall be obligated after documents to secure a loan are complete, processed, and appropriately signed by the applicant and the director.(2) The director may approve a borrower's request for one initial disbursement of loan proceeds to the borrower after the loan is closed, and before work begins. (a) the initial disbursement shall be for the lesser of 40% of the approved loan amount or the amount required by the borrower's contractor as an initial payment before work is done.(b) disbursement of the remaining loan proceeds, or disbursement of the entire loan proceeds if no initial disbursement is made, shall be made after work at the site is completed, and paperwork and notifications have been received by the director. (i) if an initial loan disbursement is made, the borrower shall begin work on the project no later than 60 days, or another time period approved by the director, following the initial disbursement. (ii) disbursement of the remaining loan proceeds shall be made no later than 180 days, or another time period approved by the director, following the initial disbursement.(c) if work is not initiated or completed within the time periods established in Subsection R311-212-7(2)(a), the loan balance must be paid within 30 days of notice provided by the director.(3) Loan proceeds may not be used to pay UST registration fees, penalties, or interest assessed under Section 19-6-408 or petroleum storage tank fees, penalties, or interest assessed under Section 19-6-411.(4) Loans shall not be made for work which is performed before the applicant's loan application is approved and the loan is closed.Utah Admin. Code R311-212-7
Amended by Utah State Bulletin Number 2016-24, effective 1/1/2017Amended by Utah State Bulletin Number 2021-18, effective 9/13/2021Amended by Utah State Bulletin Number 2022-15, effective 7/15/2022