Utah Admin. Code 309-600-8

Current through Bulletin 2024-12, June 15, 2024
Section R309-600-8 - DWSP Plan Review
(1) The Director shall review each DWSP Plan submitted by PWSs and "concur," "concur with recommendations," "conditionally concur" or "disapprove" the plan. The Director may also authorize the designated DDW Source Protection Manager to issue the following actions: "concur" and "concur with recommendations."
(2) The Director may "disapprove" DWSP Plans for any of the following reasons:
(a) An inaccurate DWSP Delineation Report, a report that uses a non-applicable delineation method, or a DWSP Plan that is missing this report or any of the information and data required in it (refer to R309-600-9(6));
(b) an inaccurate Prioritized Inventory of Potential Contamination Sources or a DWSP Plan that is missing this report or any of the information required in it (refer to R309-600-10(1));
(c) an inaccurate assessment of current controls (refer to R309-600-10(2));
(d) a missing Management Program to Control Each Preexisting Potential Contamination Source which has been assessed as "not adequately controlled" by the PWS (refer to R309-600-11(1));
(e) a missing Management Program to Control or Prohibit Future Potential Contamination Sources (refer to R309-600-12);
(f) a missing or incomplete Implementation Schedule, Resource Evaluation, Recordkeeping Section, Contingency Plan, or Public Notification Plan (refer to R309-600-7(1)(e) -(g), R309-600-14, and R309-600-15).
(3) The Director may "concur with recommendations" when PWSs propose management programs to control preexisting potential contamination sources or management programs to control or prohibit future potential contamination sources for existing or new drinking water sources which appear inadequate or ineffective.
(4) The Director may "conditionally concur" with a DWSP Plan or PER. The PWS must implement the conditions and report compliance the next time the DWSP Plan is due and submitted to DDW.

Utah Admin. Code R309-600-8

Amended by Utah State Bulletin Number 2017-23, effective 11/6/2017