Utah Admin. Code 307-355-5
Current through Bulletin 2024-17, September 1, 2024
The owner or operator shall not apply coatings to aerospace vehicles or components with a VOC content greater than the amounts specified in Table 1 unless the owner or operator uses an add-on control device as specified in R307-355-9.
TABLE 1
(Values in grams of VOC per liter of material, minus water and exempt solvents (compounds not classified as VOC as defined in R307-101-2 ), as applied)
| Coating type VOC Content Limit (g/l) | |
| Ablative Coating | 600 |
| Adhesion Promoter | 890 |
| Adhesive Bonding Primers: | |
| Cured at 250 deg°F or below | 850 |
| Cured above 250°deg F | 1030 |
| Adhesives: | |
| Commercial Interior Adhesive | 760 |
| Cyanoacrylate Adhesive | 1,020 |
| Fuel Tank Adhesive | 620 |
| Nonstructural Adhesive | 360 |
| Rocket Motor Bonding Adhesive | 890 |
| Rubber-based Adhesive | 850 |
| Structural Autoclavable Adhesive | 60 |
| Structural Nonautoclavable Adhesive | 850 |
| Antichafe Coating | 660 |
| Bearing Coating | 620 |
| Caulking and Smoothing Compounds | 850 |
| Chemical Agent-Resistant Coating | 550 |
| Clear Coating | 720 |
| Commercial Exterior Aerodynamic | |
| Compatible Substrate Primer | 780 |
| Corrosion Prevention Compound | 710 |
| Cryogenic Flexible Primer | 645 |
| Dry Lubricative Material | 880 |
| Cryoprotective Coating | 600 |
| Electric or Radiation-Effect Coating | 800 |
| Electrostatic Discharge and Electromagnetic | |
| Interference (EMI) Coating | 800 |
| Elevated-Temperature Skydrol-Resistant | |
| Primer | 740 |
| Epoxy Polyamide Topcoat | 660 |
| Fire-Resistant (interior) Coating | 800 |
| Flexible Primer | 640 |
| Flight-Test Coatings: | |
| Missile or Single Use Aircraft | 420 |
| All Other | 840 |
| Fuel-Tank Coating | 720 |
| G enera l Aviation Rework Primer and Topcoat | 5 40 |
| High-Temperature Coating | 850 |
| Insulation Covering | 740 |
| Intermediate Release Coating | 750 |
| Lacquer | 830 |
| Maskants: | |
| Bonding Maskant | 1,230 |
| Critical Use and Line Sealer Maskant | 1,020 |
| Seal Coat Maskant | 1,230 |
| Metalized Epoxy Coating | 740 |
| Mold Release | 780 |
| Optical Anti-Reflective Coating | 750 |
| Part Marking Coating | 850 |
| Pretreatment Coating | 780 |
| Primer | 350 |
| Rain Erosion Resistant Coating | 850 |
| Rocket Motor Nozzle Coating | 660 |
| Scale Inhibitor | 880 |
| Screen Print Ink | 840 |
| Sealants: | |
| Extrudable/Rollable/Brushable Sealant | 280 |
| Sprayable Sealant | 600 |
| Silicone Insulation Material | 850 |
| Solid Film Lubricant | 880 |
| Specialized Function Coating | 890 |
| Temporary Protective Coating | 320 |
| Thermal Control Coating | 800 |
| Topcoat | 420 |
| Type I chemical milling maskant | 622 |
| Type II chemical milling maskants | 160 |
| Wet Fastener Installation Coating | 675 |
| Wing Coating | 850 |
Utah Admin. Code R307-355-5