Utah Admin. Code 307-350-6

Current through Bulletin 2024-17, September 1, 2024

Section R307-350-6 - Application Methods

No owner or operator shall apply VOC containing coatings to metal parts and products unless the coating is applied with equipment operated according to the equipment manufacturer specifications, and by the use of one of the following methods:

(1) Electrostatic application;

(2) Flow coat;

(3) Dip/electrodeposition coat;

(4) Roll coat;

(5) Hand Application Methods;

(6) High-volume, low-pressure (HVLP) spray; or

(7) Another application method capable of achieving 65% or greater transfer efficiency equivalent or better to HVLP spray, as certified by the manufacturer.

Utah Admin. Code R307-350-6

Amended by Utah State Bulletin Number 2018-1, effective 12/6/2017