Section R307-350-3 - Exemptions(1) The requirements of R307-350 do not apply to the following: (a) The surface coating of automobiles subject to R307-354 and light-duty trucks;(b) Flat metal sheets and strips in the form of rolls or coils;(c) Surface coating of aerospace vehicles and components subject to R307-355;(d) The exterior of marine vessels;(e) Customized top coating of automobiles and trucks if production is less than 35 vehicles per day;(f) Military munitions manufactured by or for the Armed Forces of the United States;(g) Operations that are exclusively covered by Department of Defense military technical data and performed by a Department of Defense contractor and/or on site at installations owned and/or operated by the United States Armed Forces; (h) Stripping of cured coatings and adhesives;(i) Canned aerosol coating products ;(j) Research and development, quality control, or performance testing activities; or(k) The provisions of R307-350 shall not apply to coating products on medical devices up to 800 pounds of VOC per year.(2) The requirements of R307-350-5 do not apply to the following: (a) Stencil and hand lettering coatings;(b) Safety-indicating coatings;(c) Solid-film lubricants;(d) Electric-insulating and thermal-conducting coatings;(e) Magnetic data storage disk coatings; or(f) Plastic extruded onto metal parts to form a coating.(3) The requirements of R307-350-6 do not apply to the following: Utah Admin. Code R307-350-3
Amended by Utah State Bulletin Number 2018-1, effective 12/6/2017