Section R307-361-5 - Standards(1) Except as provided in R307-361-4, no person shall manufacture, blend, or repackage, supply, sell, or offer for sale within the counties in R307-361-2; or solicit for application or apply within those counties any architectural coating with a VOC content in excess of the corresponding limit specified in Table 1. TABLE 1 VOC Content Limit for Architectural and Industrial Maintenance Coatings (Limits are expressed as VOC content, thinned to the manufacturer's maximum thinning recommendation, excluding any colorant added to tint bases.) |
COATING CATEGORY | VOC Content Limit (grams/liter) |
Flat coatings | 50 |
Non-flat coatings | 100 |
Non-flat/high-gloss coatings | 150 |
Specialty Coatings | |
Aluminum roofing | 450 |
Basement Specialty Coatings | 400 |
Bituminous Specialty Coatings | 400 |
Bituminous roof coatings | 270 |
Bituminous roof primers | 350 |
Bond beakers | 350 |
Calcimine recoaters | 475 |
Concrete curing compounds | 350 |
Concrete/masonary sealer | 100 |
Concrete surface retarders | 780 |
Conjugated oil varnish | 450 |
Conversion varnish | 725 |
Driveway sealers | 50 |
Dry fog coatings | 150 |
Faux finishing coatings | 350 |
Fire resistive coatings | 350 |
Floor coatings | 100 |
Form-release compounds | 250 |
Graphic arts coatings (sign paints) | 500 |
High temperature coatings | 420 |
Impacted Immersion Coatings | 780 |
Industrial maintenance coatings | 250 |
Low solids coatings | 120 |
Magnesite cement coatings | 450 |
Mastic texture coatings | 100 |
Metallic pigmented coatings | 500 |
Multi-color coatings | 250 |
Nuclear coatings | 450 |
Pre-treatment wash primers | 420 |
Primers, sealers, and undercoaters | 100 |
Reactive penetrating sealer | 350 |
Reactive penetrating carbonate stone sealer | 500 |
Recycled coatings | 250 |
Roof coatings | 250 |
Rust preventative coatings Shellacs: | 250 |
Clear | 730 |
Opaque | 550 |
Specialty primers, sealers, and undercoaters | 100 |
Stains | 250 |
Stone consolidant | 450 |
Swimming pool coatings | 340 |
Thermoplastic rubber coatings and mastic | 550 |
Traffic marking coatings | 100 |
Tub and tile refinish | 420 |
Waterproofing membranes | 250 |
Wood coating | 275 |
Wood Preservatives | 350 |
Zinc-Rich Primer | 340 |
(2) If a coating is recommended for use in more than one of the specialty coating categories listed in Table 1, the most restrictive (lowest) VOC content limit shall apply. (a) This requirement applies to usage recommendations that appear anywhere on the coating container, anywhere on any label or sticker affixed to the container, or in any sales, advertising, or technical literature supplied by a manufacturer or anyone acting on their behalf.(b)R307-361-5(2) does not apply to the following coating categories: (i) Aluminum roof coatings(ii) Bituminous roof primers(iv) High temperature coatings(v) Industrial maintenance coatings(vii) Metallic pigmented coatings(viii) Pretreatment wash primers(x) Specialty primers, sealers and undercoaters(xiv) Calcimine recoaters(xv) Impacted immersion coatings(xvii) Thermoplastic rubber coatings and mastic(xviii) Concrete surface retarders(3) Sell-through of coatings. A coating manufactured prior to January 1, 2015, may be sold, supplied, or offered for sale for up to three years after January 1, 2015. (a) A coating manufactured before January 1, 2015, may be applied at any time.(b)R307-361-5(3) does not apply to any coating that does not display the date or date code required by R307-361-6(1)(a).(4) Painting practices. All architectural coating containers used when applying the contents therein to a surface directly from the container by pouring, siphoning, brushing, rolling, padding, ragging or other means, shall be closed when not in use. These architectural coating containers include, but are not limited to, drums, buckets, cans, pails, trays or other application containers. Containers of any VOC-containing materials used for thinning and cleanup shall also be closed when not in use.(5) Thinning. No person who applies or solicits the application of any architectural coating shall apply a coating that is thinned to exceed the applicable VOC limit specified in Table 1.(6) Rust preventative coatings. No person shall apply or solicit the application of any rust preventative coating manufactured before January 1, 2015 for industrial use, unless such a rust preventative coating complies with the industrial maintenance coating VOC limit specified in Table 1.(7) Coatings not listed in Table 1. For any coating that does not meet any of the definitions for the specialty coatings categories listed in Table 1, the VOC content limit shall be determined by classifying the coating as a flat, non-flat, or non-flat/high gloss coating, based on its gloss, as defined in R307-361-3 and the corresponding flat, non-flat, or non-flat/high gloss coating VOC limit in Table 1 shall apply.Utah Admin. Code R307-361-5