Utah Admin. Code 307-361-3
The following additional definitions apply only to R307-361.
"Adhesive" means any chemical substance that is applied for the purpose of bonding two surfaces together other than by mechanical means.
"Aerosol coating product" means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application or for use in specialized equipment for ground traffic/marking applications.
"Aluminum roof coating" means a coating labeled and formulated exclusively for application to roofs and containing at least 84 grams of elemental aluminum pigment per liter of coating (at least 0.7 pounds per gallon).
"Appurtenance" means any accessory to a stationary structure coated at the site of installation, whether installed or detached, including, but not limited to, bathroom and kitchen fixtures; cabinets; concrete forms; doors; elevators; fences; hand railings; heating equipment, air conditioning equipment, and other fixed mechanical equipment or stationary tools; lampposts; partitions; pipes and piping systems; rain gutters and downspouts; stairways, fixed ladders, catwalks, and fire escapes; and window screens.
"Architectural coating" means a coating to be applied to stationary structures or their appurtenances at the site of installation, to portable buildings at the site of installation, to pavements, or to curbs.
(1) Coatings applied in shop applications or to non-stationary structures such as airplanes, ships, boats, railcars, and automobiles, and adhesives are not considered architectural coatings for the purposes of this rule.
"Basement specialty coating" means a clear or opaque coating that is labeled and formulated for application to concrete and masonary surfaces to provide a hydrostatic seal for basements and other below-grade surfaces, meeting the following criteria:
(1) Coating must be capable of withstanding at least 10 psi of hydrostatic pressure, as determined in accordance with ASTM D7088-04 and;
(2) Coating must be resistant to mold and mildew growth and must achieve a microbial growth rating of 8 or more, as determined in accordance with ASTM D3273-00 and ASTM D3274-95.
"Bitumens" means black or brown materials including, but not limited to, asphalt, tar, pitch, and asphaltite that are soluble in carbon disulfide, consist mainly of hydrocarbons, and are obtained from natural deposits or as residues from the distillation of crude petroleum or coal.
"Bituminous roof coating" means a coating that incorporates bitumens and that is labeled and formulated exclusively for roofing for the primary purpose of preventing water penetration.
"Bituminous roof primer" means a primer that incorporates bitumens and that is labeled and formulated exclusively for roofing and intended for the purpose of preparing a weathered or aged surface or improving adhesion of subsequent surface components.
"Bond breaker" means a coating labeled and formulated for application between layers of concrete to prevent a freshly poured top layer of concrete from bonding to the layer over which it is poured.
"Calcimine recoaters" means a flat solvent borne coating formulated and recommended specifically for coating calcimine-painted ceilings and other calcimine-painted substrates.
"Coating" means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes, and such materials include, but are not limited to, paints, varnishes, sealers, and stains.
"Colorant" means a concentrated pigment dispersion in water, solvent, or binder that is added to an architectural coating after packaging in sale units to produce the desired color.
"Concrete curing compound" means a coating labeled and formulated for application to freshly poured concrete to retard the evaporation of water and or harden or dustproof the surface of freshly poured concrete.
"Concrete/masonry sealer" means a clear or opaque coating that is labeled and formulated primarily for application to concrete and masonry surfaces to prevent penetration of water, provide resistance against abrasion, alkalis, acids, mildew, staining, or ultraviolet light, or harden or dustproof the surface of aged or cured concrete.
"Concrete surface retarder" means a mixture of retarding ingredients such as extender pigments, primary pigments, resin, and solvent that interact chemically with the cement to prevent hardening on the surface where the retarder is applied allowing the retarded mix of cement and sand at the surface to be washed away to create an exposed aggregate finish.
"Conjugated oil varnish" means a clear or semi-transparent wood coating, labeled as such, excluding lacquers or shellacs, based on a natural occurring conjugated vegetable oil (tung oil) and modified with other natural or synthetic resins; a minimum of 50% of the resin solids consisting of conjugated oil.
"Conversion varnish" means a clear acid coating with an alkyd or other resin blended with amino resins and supplied as a single component or two-component product.
"Department of Defense military technical data" means a specification that specifies design requirements, such as materials to be used, how a requirement is to be achieved, or how an item is to be fabricated or constructed.
"Driveway sealer" means a coating labeled and formulated for application to worn asphalt driveway surfaces to fill cracks, seal the surface to provide protection, or to restore or preserve the appearance.
"Dry fog coating" means a coating labeled and formulated only for spray application such that overspray droplets dry before subsequent contact with incidental surfaces in the vicinity of the surface coating activity.
"Faux finishing coating" means a coating labeled and formulated to meet one or more of the following criteria:
(1) A glaze or textured coating used to create artistic effects, including, but not limited to, dirt, suede, old age, smoke damage, and simulated marble and wood grain;
(2) A decorative coating used to create a metallic, iridescent, or pearlescent appearance and that contains at least 48 grams of pearlescent mica pigment or other iridescent pigment per liter of coating as applied (at least 0.4 pounds per gallon); or
(3) A decorative coating used to create a metallic appearance and that contains less than 48 grams of elemental metallic pigment per liter of coating as applied (less than 0.4 pounds per gallon); or
(4) A decorative coating used to create a metallic appearance and that contains greater than 48 grams of elemental metallic pigment per liter of coating as applied (greater than 0.4 pounds per gallon) and which requires a clear topcoat to prevent the degradation of the finish under normal use conditions; or
(5) A clear topcoat to seal and protect a faux finishing coating that meets the requirements of (1) through (4) of this definition, and these clear topcoats shall be sold and used solely as part of a faux finishing coating system.
"Fire-resistive coating" means a coating labeled and formulated to protect structural integrity by increasing the fire endurance of interior or exterior steel and other structural materials. The Fire-Resistive coating category includes sprayed fire resistive materials and intumescent fire resistive coatings that are used to bring structural materials into compliance with federal, state, and local building code requirements. The fire-resistant coatings shall be tested in accordance with ASTM E119-08.
"Flat coating" means a coating that is not defined under any other definition in this rule and that registers gloss less than 15 on an 85 degree meter or less than 5 on a 60 degree meter according to ASTM D523-89 (1999).
"Floor coating" means an opaque coating that is labeled and formulated for application to flooring, including, but not limited to, decks, porches, steps, garage floors, and other horizontal surfaces that may be subject to foot traffic.
"Form-release compound" means a coating labeled and formulated for application to a concrete form to prevent the freshly poured concrete from bonding to the form which may consist of wood, metal, or some material other than concrete.
"Graphic arts coating or sign paint" means a coating labeled and formulated for hand-application by artists using brush, airbrush, or roller techniques to indoor and outdoor signs, excluding structural components, and murals including lettering enamels, poster colors, copy blockers, and bulletin enamels.
"High-temperature coating" means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204 degrees Celsius (400 degrees Fahrenheit).
"Impacted immersion coating" means a high performance maintenance coating formulated and recommended for application to steel structures subject to immersion in turbulent, debris-laden water. These coatings are specifically resistant to high-energy impact damage by floating ice or debris.
"Industrial maintenance coating" means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats, formulated for application to substrates, including floors exposed to one or more of the following extreme environmental conditions:
(1) Immersion in water, wastewater, or chemical solutions (aqueous and non-aqueous solutions), or chronic exposure of interior surfaces to moisture condensation;
(2) Acute or chronic exposure to corrosive, caustic or acidic agents, or to chemicals, chemical fumes, or chemical mixtures or solutions;
(3) Frequent exposure to temperatures above 121 degrees Celsius (250 degrees Fahrenheit);
(4) Frequent heavy abrasion, including mechanical wear and frequent scrubbing with industrial solvents, cleansers, or scouring agents; or
(5) Exterior exposure of metal structures and structural components.
"Low solids coating" means a coating containing 0.12 kilogram or less of solids per liter (1 pound or less of solids per gallon) of coating material as recommended for application by the manufacturer.
"Magnesite cement coating" means a coating labeled and formulated for application to magnesite cement decking to protect the magnesite cement substrate from erosion by water.
"Manufacturer's maximum thinning recommendation" means the maximum recommendation for thinning that is indicated on the label or lid of the coating container.
"Mastic texture coating" means a coating labeled and formulated to cover holes and minor cracks and to conceal surface irregularities, and is applied in a single coat of at least 10 mils (at least 0.010 inch) dry film thickness.
"Medium density fiberboard (MDF)" means a composite wood product, panel, molding, or other building material composed of cellulosic fibers, usually wood, made by dry forming and pressing of a resinated fiber mat.
"Metallic pigmented coating" means a coating that is labeled and formulated to provide a metallic appearance and must contain at least 48 grams of elemental metallic pigment (excluding zinc) per liter of coating as applied (at least 0.4 pounds per gallon), when tested in accordance with SCAQMD Method 318-95, but does not include coatings applied to roofs, or zinc-rich primers.
"Multi-color coating" means a coating that is packaged in a single container and that is labeled and formulated to exhibits more than one color when applied in a single coat.
"Non-flat coating" means a coating that is not defined under any other definition in this rule and that registers a gloss of 15 or greater on an 85-degree meter and five or greater on a 60-degree meter according to ASTM D523-89 (1999).
"Non-flat/high-gloss coating" means a non-flat coating that registers a gloss of 70 or greater on a 60-degree meter according to ASTM D523-89 (1999).
"Nuclear coating" means a protective coating formulated and recommended to seal porous surfaces such as steel or concrete that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long-term cumulative radiation exposure according to ASTM Method 4082-02, relatively easy to decontaminate, and resistant to various chemicals to which the coatings are likely to be exposed according to ASTM Method D 3912-95 (2010).
"Particleboard" means a composite wood product panel, molding, or other building material composed of cellulosic material, usually wood, in the form of discrete particles, as distinguished from fibers, flakes, or strands, which are pressed together with resin.
"Pearlescent" means exhibiting various colors depending on the angles of illumination and viewing, as observed in mother-of-pearl.
"Plywood" means a panel product consisting of layers of wood veneers or composite core pressed together with resin and includes panel products made by either hot or cold pressing (with resin) veneers to a platform.
"Post-consumer coating" means a finished coatings generated by a business or consumer that have served their intended end uses, and are recovered from or otherwise diverted from the waste stream for the purpose of recycling.
"Pre-treatment wash primer" means a primer that contains a minimum of 0.5% acid, by weight, when tested in accordance with ASTM D1613-06, that is labeled and formulated for application directly to bare metal surfaces to provide corrosion resistance and to promote adhesion of subsequent topcoats.
"Primer, sealer, and undercoater" means a coating labeled and formulated to provide a firm bond between the substrate and the subsequent coatings, prevent subsequent coatings from being absorbed by the substrate, prevent harm to subsequent coatings by materials in the substrate, provide a smooth surface for the subsequent application of coatings, provide a clear finish coat to seal the substrate, or to block materials from penetrating into or leaching out of a substrate.
"Reactive penetrating sealer" means a clear or pigmented coating that is formulated for application to above-grade concrete and masonry substrates to provide protection from water and waterborne contaminants, including, but not limited to, alkalis, acids, and salts.
(1) Reactive penetrating sealers penetrate into concrete and masonry substrates and chemically react to form covalent bonds with naturally occurring minerals in the substrate.
(2) Reactive penetrating sealers line the pores of concrete and masonry substrates with a hydrophobic coating but do not form a surface film.
(3) Reactive penetrating sealers shall meet all of the following criteria:
(a) The reactive penetrating sealer must improve water repellency at least 80% after application on a concrete or masonry substrate, and this performance shall be verified on standardized test specimens in accordance with one or more of the following standards: ASTM C67-07, ASTM C97-02, or ASTM C140-06.
(b) The reactive penetrating sealer shall not reduce the water vapor transmission rate by more than 2% after application on a concrete or masonry substrate, and this performance must be verified on standardized test specimens, in accordance with ASTM E96/E96M-05.
(c) Products labeled and formulated for vehicular traffic surface chloride screening applications shall meet the performance criteria listed in the National Cooperative Highway Research Report 244 (1981).
"Reactive penetrating carbonate stone sealer" means a clear or pigmented coating that is labeled and formulated for application to above-grade carbonate stone substrates to provide protection from water and waterborne contaminants, including but not limited to, alkalis acids, and salts and that penetrates into carbonate stone substrates and chemically reacts to form covalent bonds with naturally occurring minerals in the substrate. They must meet all of the following criteria:
(1) Improve water repellency at least 80% after application on a carbonate stone substrate. This performance shall be verified on standardized test specimens, in accordance with one or more of the following standards: ASTM C67-07, ASTM C97-02, or ASTM C140-06; and
(2) Not reduce the water vapor transmission rate by more than 10% after application on a carbonate stone substrate. This performance shall be verified on standardized test specimens in accordance with one or more of the following standards: ASTM E96/E96M-05.
"Recycled coating" means an architectural coating formulated such that it contains a minimum of 50% by volume post-consumer coating, with a maximum of 50% by volume secondary industrial materials or virgin materials.
"Residential" means areas where people reside or lodge, including, but not limited to, single and multiple family dwellings, condominiums, mobile homes, apartment complexes, motels, and hotels.
"Roof coating" means a non-bituminous coating labeled and formulated for application to roofs for the primary purpose of preventing water penetration, reflecting ultraviolet light, or reflecting solar radiation.
"Rust preventative coating" means a coating that is for metal substrates only and is formulated to prevent the corrosion of metal surfaces for direct-to-metal coating or a coating intended for application over rusty, previously coated surfaces but does not include coatings that are required to be applied as a topcoat over a primer or coatings that are intended for use on wood or any other nonmetallic surface.
"Secondary industrial materials" means products or by-products of the paint manufacturing process that are of known composition and have economic value but can no longer be used for their intended purpose.
"Semitransparent coating" means a coating that contains binders and colored pigments and is formulated to change the color of the surface but not conceal the grain pattern or texture.
"Shellac" means a clear or opaque coating formulated solely with the resinous secretions of the lac beetle (Laciffer lacca) and formulated to dry by evaporation without a chemical reaction.
"Shop application" means an application of a coating to a product or a component of a product in or on the premises of a factory or a shop as part of a manufacturing, production, or repairing process (e.g., original equipment manufacturing coatings).
"Solicit" means to require for use or to specify by written or oral contract.
"Specialty primer, sealer, and undercoater" means a coating that is formulated for application to a substrate to block water-soluble stains resulting from fire damage, smoke damage, or water damage.
"Stain" means a semi-transparent or opaque coating labeled and formulated to change the color of a surface but not conceal the grain pattern or texture.
"Stone consolidant" means a coating that is labeled and formulated for application to stone substrates to repair historical structures that have been damaged by weathering or other decay mechanisms.
(1) Stone consolidants must penetrate into stone substrates to create bonds between particles and consolidate deteriorated material.
(2) Stone consolidants must be specified and used in accordance with ASTM E2167-01.
"Swimming pool coating" means a coating labeled and formulated to coat the interior of swimming pools and to resist swimming pool chemicals.
"Thermoplastic rubber coating and mastic" means a coating or mastic formulated and recommended for application to roofing or other structural surfaces that incorporates no less than 40% by weight of thermoplastic rubbers in the total resin solids and may also contain other ingredients, including, but not limited to, fillers, pigments, and modifying resins.
"Tint base" means an architectural coating to which colorant is added after packaging in sale units to produce a desired color.
"Traffic marking coating" means a coating labeled and formulated for marking and striping streets, highways, or other traffic surfaces, including, but not limited to, curbs, berms, driveways, parking lots, sidewalks, and airport runways.
"Tub and tile refinish coating" means a clear or opaque coating that is labeled and formulated exclusively for refinishing the surface of a bathtub, shower, sink, or countertop and that meets the following criteria:
(1) Has a scratch hardness of 3H or harder and a gouge hardness of 4H or harder, determined on bonderite 1000, in accordance with ASTM D3363-05;
(2) Has a weight loss of 20 milligrams or less after 1,000 cycles, determined with CS-17 wheels on bonderite 1000, in accordance with ASTM D4060-07;
(3) Withstands 1,000 hours or more of exposure with few or no #8 blisters, determined on unscribed bonderite in accordance with ASTM D4585-99, and ASTM D714-02e1; and
(4) Has an adhesion rating of 4B or better after 24 hours of recovery, determined on unscribed bonderite in accordance with ASTM D4585-99 and ASTM D3359-02.
"Veneer" means thin sheets of wood peeled or sliced from logs for use in the manufacture of wood products such as plywood, laminated veneer lumber, or other products.
"Virgin Materials" means materials that contain no post-consumer coatings or secondary industrial materials.
"VOC actual" means the weight of VOC per volume of coating and applies to coatings in the low solids coatings category and it is calculated with the following equation:
VOC Actual = (Ws - Ww - Wec)/(Vm)
Where, VOC actual = the grams of VOC per liter of coating (also known as "Material VOC");
Ws = weight of volatiles, in grams;
Ww = weight of water, in grams;
Wec = weight of exempt compounds, in grams; and
Vm = volume of coating, in liters
"VOC content" means the weight of VOC per volume of coating and is VOC regulatory for all coatings except those in the low solids category.
(1) For coatings in the low solids category, the VOC Content is VOC actual.
(2) If the coating is a multi-component product, the VOC content is VOC regulatory as mixed or catalyzed.
(3) If the coating contains silanes, siloxanes, or other ingredients that generate ethanol or other VOCs during the curing process, the VOC content must include the VOCs emitted during curing.
(4) VOC content must include maximum amount of thinning solvent recommended by the manufacturer.
"VOC regulatory" means the weight of VOC per volume of coating, less the volume of water and exempt compounds. It is calculated with the following equation:
VOC Regulatory = (Ws - Ww - Wec)/(Vm - Vw - Vec)
Where, VOC regulatory = grams of VOC per liter of coating, less water and exempt compounds (also known as "Coating VOC");
Ws = weight of volatiles, in grams;
Ww = weight of water, in grams;
Wec = weight of exempt compounds, in grams;
Vm = volume of coating, in liters;
Vw = volume of water, in liters; and
Vec = volume of exempt compounds, in liters
VOC regulatory must include maximum amount of thinning solvent recommended by the manufacturer.
"Waterproofing membrane" means a clear or opaque coating that is labeled and formulated for application to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate.
(1) Waterproofing membranes are intended for the following waterproofing applications: below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters, and under flooring materials.
(2) The waterproofing membrane category does not include topcoats that are included in the concrete/masonry sealer category (e.g., parking deck topcoats, pedestrian deck topcoats, etc.).
(3) Waterproofing Membranes shall:
(a) Be applied in a single coat of at least 25 mils (at least 0.025 inch) dry film thickness; and
(b) Meet or exceed the requirements contained in ASTM C836-06.
"Wood coatings" means coatings labeled and formulated for application to wood substrates only and include clear and semitransparent coatings: lacquers; varnishes; sanding sealers; penetrating oils; clear stains; wood conditioners used as undercoats; and wood sealers used as topcoats. The Wood Coatings category also includes the following opaque wood coatings: opaque lacquers, opaque sanding sealers, and opaque lacquer undercoaters but do not include clear sealers that are labeled and formulated for use on concrete/masonry surfaces or coatings intended for substrates other than wood.
"Wood preservative" means a coating labeled and formulated to protect exposed wood from decay or insect attack that is registered with the U.S. EPA under the Federal Insecticide, Fungicide, and Rodenticide Act (7 United States Code (U.S.C.) Section 136, et seq.).
"Wood substrate" means a substrate made of wood, particleboard, plywood, medium density fiberboard, rattan, wicker, bamboo, or composite products with exposed wood grain but does not include items comprised of simulated wood.
"Zinc-rich primer" means a coating that contains at least 65% metallic zinc powder or zinc dust by weight of total solids and is formulated for application to metal substrates to provide a firm bond between the substrate and subsequent applications of coatings and are intended for professional use only.
Utah Admin. Code R307-361-3