Section R307-342-3 - Exemptions(1) The requirements of R307-342 do not apply to the following: (a) Adhesives, sealants, adhesive primers or sealant primers being tested or evaluated in any research and development, quality assurance or analytical laboratory;(b) Adhesives and sealants that contain less than 20 grams of VOC per liter of adhesive or sealant, less water and exempt solvents, as applied;(c) Cyanoacrylate adhesives;(d) Adhesives, sealants, adhesive primers or sealant primers that are sold or supplied by the manufacturer or supplier in containers with a net volume of 16 fluid ounces or less or that have a net weight of one pound or less, except plastic cement welding adhesives and contact adhesives;(e) Contact adhesives that are sold or supplied by the manufacturer or supplier in containers with a net volume of one gallon or less;(f) Aerosol adhesives and primers dispensed from aerosol spray cans; or(g) Polyester bonding putties to assemble fiberglass parts at fiberglass boat manufacturing facilities and at other reinforced plastic composite manufacturing facilities.(2) The requirements of R307-342 do not apply to the use of adhesives, sealants, adhesive primers, sealant primers, surface preparation and cleanup solvents in the following operations: (a) Tire repair operations, provided the label of the adhesive states "for tire repair only;"(b) In the production, rework, repair, or maintenance of aerospace vehicles and components, and undersea-based weapon systems;(c) In the manufacture of medical equipment;(d) Operations that are exclusively covered by Department of Defense military technical specifications and standards and performed by a Department of Defense contractor and/or on site at installations owned and/or operated by the United States Armed Forces.(e) Plaque laminating operations in which adhesives are used to bond clear, polyester acetate laminate to wood with lamination equipment installed prior to July 1, 1992.(3) The requirements of R307-342 do not apply to commercial and industrial operations if the total VOC emissions from all adhesives, sealants, adhesive primers and sealant primers used at the source are less than 200 pounds per calendar year.(4) Adhesive products and sealant products shipped, supplied or sold exclusively outside of the areas specified in R307-342-2 are exempt from the requirements of this rule.(5) R307-342 shall not apply to any adhesive, sealant, adhesive primer or sealant primer products manufactured for shipment and use outside of the counties specified R307-342-2 as long as the manufacturer or distributor can demonstrate both that the product is intended for shipment and use outside of the applicable counties and that the manufacturer or distributor has taken reasonable prudent precautions to assure that the product is not distributed to the applicable counties.(6) R307-342 shall not apply to the use of any adhesives, sealants, adhesive primers, sealant primers, cleanup solvents and surface preparation solvents, provided the total volume of noncomplying adhesives, sealants, primers, cleanup and surface preparation solvents applied facility-wide does not exceed 55 gallons per rolling 12-month period.(7) Commercial and industrial operations claiming exemption pursuant to R307-342-3 shall record and maintain operational records sufficient to demonstrate compliance.Utah Admin. Code R307-342-3
Amended by Utah State Bulletin Number 2014-19, effective 9/4/2014