Section R156-11a-805 - Approved Nail Technician Apprenticeship RequirementsIn accordance with Subsection 58-11a-102(4), the requirements for an approved nail technician apprenticeship include the following:
(1) In accordance with Subsection 58-11a-306(5)(b)(iii), an instructor is required to provide one-on-two direct supervision of their apprentices during the apprenticeship program. This does not preclude an instructor from having more than two apprentices; however, if an instructor has more than two apprentices, the instructor may not simultaneously supervise more than two apprentices, and the same hour or hours of instruction may not be credited toward more than two apprentices.(2) The apprentice shall be registered with the Division by submitting a form prescribed by the Division.(3) The instructor shall be approved by the Division for the apprenticeship. The instructor may not have had any disciplinary action in the preceding three years.(4) There shall be a conspicuous sign near the workstation of the apprentice stating, "Apprentice in Training."(5)(a) The instructor and apprentice shall keep a daily record that documents the total number of hours of training, to include:(i) the hours of theory instruction;(ii) the hours of practical instruction;(iii) the number and type of client services performed, and other services performed.(b) The daily record shall be immediately available to the Division upon request.(6) A complete set of nail technician texts shall be available to the apprentice.(7) An apprentice may be compensated for services performed.(8) The instructor shall provide training and technical instruction of 375 hours using the curriculum defined in Section R156-11a-704.(9) The instructor shall limit the training of the apprentice to not more than 40 hours per week and not more than five days out of every seven consecutive days.(10) An apprentice may not perform work on the public until the apprentice has received at least 10% of the hours of technical training, with at least a portion of that time devoted to each of the subjects specified in Section R156-11a-704.(11) Hours obtained while enrolled in a nail technology school or a cosmetology/barber school may not be used to satisfy the required 375 hours of apprentice training.(12) If an apprentice completes the apprenticeship and fails the NIC Nail Technology Theory Examination or NIC Nail Technology Practical Examination three times, the apprentice and instructor shall: (a) meet with the Board at the next appropriate Board meeting;(b) explain to the Board why the apprentice is not able to pass the examination; and(c) provide to the Board a plan of study in the appropriate subject matter to assist the apprentice in passing the examination.Utah Admin. Code R156-11a-805
Amended by Utah State Bulletin Number 2021-02, effective 12/17/2020