Section R152-32a-6 - Fingerprint Legibility Standards and Criteria(1) This rule incorporates by reference: (a) Electronic Biometric Transmission Specification, version 11.0, Appendix F: Image Quality Specifications, promulgated by the United States Department of Justice, Federal Bureau of Investigation, Criminal Justice Information Services Division, April 16, 2021 (EBTS 11.0 Appendix F); and(b) Personal Identity Verification Image Quality Specifications for Single Finger Capture Devices, Federal Bureau of Investigation Criminal Justice Information Services Division Biometric Specifications, July 10, 2006 (PIV-071006).(2) A tangible fingerprint is legible if the fingerprint: (a) captures the complete print of an individual's right index finger pressed flat, or other finger if the right index finger is unavailable;(b) is not smudged or otherwise obscured; and(c) is made using ink and paper that contrast sufficiently to make the fingerprint's details clearly visible.(3) An electronic fingerprint is legible if the fingerprint: (a) captures the complete print of an individual's right index finger pressed flat, or other finger if the right index finger is unavailable; and(b) is made using a device that satisfies standards established by the Federal Bureau of Investigation, including: (i) EBTS 11.0 Appendix F; orUtah Admin. Code R152-32a-6
Adopted by Utah State Bulletin Number 2022-01, effective 12/23/2021Amended by Utah State Bulletin Number 2022-21, effective 10/24/2022