Section R70-101-14 - [Effective 1/28/2025] Second Hand Tagging Requirements(1) A tag for a second hand article shall be:(a) a minimum of two inches by three inches;(b) yellow on both sides of the tag;(c) made of material that cannot be easily torn;(e) printed in black ink;(f) printed clearly and legibly; and(g) comply with Subsection 4-10-110(2)(b).(2) The required information shall be printed on one side of the tag, with the opposite side remaining blank.(3) A second hand tag shall contain the following information, in order:(a) the phrase "UNDER PENALTY OF LAW THIS TAG NOT TO BE REMOVED EXCEPT BY THE CONSUMER" in bold at the top of the label in capital letters, no less than 1/8 inch in height;(b) the phrase, "THIS ARTICLE CONTAINS SECOND HAND MATERIAL CONSISTING OF CONTENTS UNKNOWN". The words "SECONDHAND MATERIAL" and "CONTENTS UNKNOWN" shall be in capital letters, size not less than 1/8 inches in height;(c) the phrase, "Certification is made that the materials in this article are described in accordance with law"; and(d) the store name and complete corporate address.(4) A tag shall be easily accessible to the consumer for examination.(5) A tag may not contain marks, labels, printed matter, illustrations, stickers, or any other device.Utah Admin. Code R70-101-14
Amended by Utah State Bulletin Number 2015-16, effective 7/22/2015Amended by Utah State Bulletin Number 2017-4, effective 1/26/2017Amended by Utah State Bulletin Number 2020-12, effective 6/8/2020Amended by Utah State Bulletin Number 2022-08, effective 4/5/2022Amended by Utah State Bulletin Number 2023-08, effective 4/4/2023Amended by Utah State Bulletin Number 2024-05, effective 2/2/2024, exp. 6/1/2024 (Emergency)Amended by Utah State Bulletin Number 2024-12, effective 6/1/2024, exp. 9/29/2024 (Emergency)Amended by Utah State Bulletin Number 2024-20, effective 9/30/2024, exp. 1/28/2025 (Emergency)Adopted by Utah State Bulletin Number 2024-21, effective 10/23/2024