Section R70-101-11 - [Effective until 1/28/2025] Generic Names, Grades, Descriptive Terms, and Definitions of Filling Material(1) Filling material shall be described on the label and the tag using the: (c) description terms; or(d) definition of the filling material that has been approved by the department.(2) When more than one kind of filling material is used in a mixture, the percentage by weight shall be listed in order of predominance. (a) Federal fiber tolerance standards are applicable, except as pertains to a plumage product.(b) Blends may be described in accordance with Section R70-101-10.(3) When a different filling material is used in different parts of the garment, the areas of the garment shall be named, followed by the name of the filling material used in that area.Utah Admin. Code R70-101-11
Amended by Utah State Bulletin Number 2015-16, effective 7/22/2015Amended by Utah State Bulletin Number 2017-4, effective 1/26/2017Amended by Utah State Bulletin Number 2020-12, effective 6/8/2020Amended by Utah State Bulletin Number 2022-08, effective 4/5/2022Amended by Utah State Bulletin Number 2023-08, effective 4/4/2023Amended by Utah State Bulletin Number 2024-05, effective 2/2/2024, exp. 6/1/2024 (Emergency)Amended by Utah State Bulletin Number 2024-12, effective 6/1/2024, exp. 9/29/2024 (Emergency)Amended by Utah State Bulletin Number 2024-20, effective 9/30/2024, exp. 1/28/2025 (Emergency)