Section R66-32-7 - Test Results Exceeding 0.3% THC Concentration in Pre-Harvest Testing(1) Any sample test result where the total THC concentration of the sample is higher than the acceptable hemp THC level shall be conclusive evidence that one or more cannabis plants or plant products from the lot represented by the sample contain a THC concentration over that allowed.(2) If the results of a test conclude that the THC concentration levels of a sample are higher than the acceptable hemp THC level, the industrial hemp testing laboratory shall promptly notify the producer, the department and the USDA.(3) A noncompliant sample may be re-tested, at the expense of the licensee, if they believe that the original THC concentration levels were in error.(4) An industrial hemp testing laboratory shall follow the same procedures used in the initial test for any retests.(5) Re-test results will be shared with the licensee, the department, and the USDA.(6) If the industrial hemp material is >1% total THC content the industrial hemp testing laboratory must notify law enforcement.(7) Remediated biomass submitted for official compliance testing shall follow the same procedures used to conduct the initial test.Utah Admin. Code R66-32-7
Adopted by Utah State Bulletin Number 2024-10, effective 5/13/2024