Section R33-113-203 - Methods of Construction Contract Management(1) This section contains provisions applicable to the selection of the appropriate type of construction contract management.(2) It is intended that the procurement official have sufficient flexibility in formulating the construction contract management method for a particular project to fulfill the needs of the procurement unit. The methods for achieving the purposes set forth in this rule are not to be construed as an exclusive list.(3) Before choosing the construction contracting method to use, a careful assessment must be made by the procurement official of requirements the project shall consider, at a minimum, the following factors:(a) when the project must be ready to be occupied;(b) the type of project, for example, housing, offices, labs, heavy or specialized construction;(c) the extent to which the requirements of the procurement unit and the way in which they are to be met are known;(d) the location of the project;(e) the size, scope, complexity, and economics of the project;(f) the amount and type of financing available for the project, including whether the budget is fixed or what the source of funding is, for example, general or special appropriation, federal assistance moneys, general obligation bonds or revenue bonds, lapsing or nonlapsing status and legislative intent language;(g) the availability, qualification, and experience of the procurement unit's personnel to be assigned to the project and how much time the procurement unit's personnel can devote to the project;(h) the availability, qualifications and experience of outside consultants and contractors to complete the project under the various methods being considered;(i) the results achieved on similar projects in the past and the methods used; and(j) the comparative advantages and disadvantages of the construction contracting method and how they might be adapted or combined to fulfill the needs of the procuring agencies.(4) The following descriptions are provided for the more common construction contracting management methods which may be used by the procurement unit. The methods described are not mutually exclusive and may be combined on a project. These descriptions are not intended to be fixed in respect to construction projects. In each project, these descriptions may be adapted to fit the circumstances of that project. (a) Single Prime Contractor or General Contractor. The single prime contractor method is typified by one business, acting as a general contractor, contracting with the procurement unit to timely complete an entire construction project in accordance with drawings and specifications provided by the procurement unit. Generally, the drawings and specifications are prepared by an architectural or engineering firm under contract with the procurement unit. Further, while the general contractor may take responsibility for successful completion of the project, much of the work may be performed by specialty contractors with whom the prime contractor has entered into subcontracts.(b) Multiple Prime Contractors. Under the multiple prime contractor method, the procurement unit contracts directly with a number of general contractors or specialty contractors to complete portions of the project in accordance with the procurement unit's drawings and specifications. The procurement unit may have primary responsibility for successful completion of the entire project, or the contracts may provide that one or more of the multiple prime contractors has this responsibility.(c) Design-Build. In a design-build project, an entity, often a team of a general contractor and a designer, contract directly with a procurement unit to meet the procurement unit's requirements as described in a set of performance specifications, program, or both. Design responsibility and construction responsibility both rest with the design-build contractor. This method can include instances where the design-build contractor supplies the site as part of the package.(d) Construction Manager Not at Risk. A construction manager is a person experienced in construction that has the ability to evaluate and to implement drawings and specifications as they affect time, cost, and quality of construction and the ability to coordinate the construction of the project, including the administration of change orders as well as other responsibilities as described in the contract.(e) Construction Manager or General Contractor, also known as Construction Manager at Risk. The procurement unit may contract with the construction manager early in a project to assist in the development of a cost-effective design. In a Construction Manager/General Contractor (CM/GC) method, the CM/GC becomes the general contractor and is at risk for the responsibilities of a general contractor for the project, including meeting the specifications, complying with applicable laws, rules and regulations, that the project will be completed on time and will not exceed a specified maximum price.Utah Admin. Code R33-113-203
Adopted by Utah State Bulletin Number 2024-15, effective 7/9/2024, exp. 11/6/2024 (Emergency)Adopted by Utah State Bulletin Number 2024-21, effective 10/22/2024