30 Tex. Admin. Code § 113.2315

Current through Reg. 49, No. 44; November 1, 2024
Section 113.2315 - What operating limits must I meet and by when?
(a) If you use a wet scrubber to comply with the emission limitations, you must establish operating limits for four operating parameters (as specified in Table 3 in § 113.2357 of this title (relating to Tables Relating to Division 5)) as described in paragraphs (1) through (4) of this subsection during the initial performance test.
(1) Maximum charge rate, calculated using one of the two different procedures in subparagraph (A) or (B) of this paragraph, as appropriate.
(A) For continuous and intermittent units, maximum charge rate is the average charge rate measured during the most recent performance test demonstrating compliance with all applicable emission limitations.
(B) For batch units, maximum charge rate is the charge rate measured during the most recent performance test demonstrating compliance with all applicable emission limitations.
(2) Minimum pressure drop across the wet scrubber, which is calculated as the average pressure drop across the wet scrubber measured during the most recent performance test demonstrating compliance with the particulate matter emission limitations; or minimum amperage to the wet scrubber, which is calculated as the average amperage to the wet scrubber measured during the most recent performance test demonstrating compliance with the particulate matter emission limitations.
(3) Minimum scrubber liquor flow rate, which is calculated as the average liquor flow rate at the inlet to the wet scrubber measured during the most recent performance test demonstrating compliance with all applicable emission limitations.
(4) Minimum scrubber liquor pH, which is calculated as the average liquor pH at the inlet to the wet scrubber measured during the most recent performance test demonstrating compliance with the hydrogen chloride and sulfur dioxide emission limitations.
(b) You must meet the operating limits established during the initial performance test beginning on the date 180 days after your final compliance date in Table 1 in § 113.2357 of this title.

30 Tex. Admin. Code § 113.2315

The provisions of this §113.2315 adopted to be effective May 14, 2009, 34 TexReg 2771