Current through Reg. 49, No. 50; December 13, 2024
Section 10.621 - Property Condition Standards(a) All Developments funded by the Department must be decent, safe, sanitary, in good repair, and suitable for occupancy throughout the Affordability Period. The Department will use HUD's National Standards for the Physical Inspection of Real Estate (NSPIRE) to determine compliance with property condition standards. In addition, Developments must comply with all local health, safety, and building codes. Timelines for correcting deficiencies under the NSPIRE standards are as follows:(1) Life-Threatening and Severe deficiencies must be corrected within 24 hours.(2) Moderate deficiencies must be corrected within 30 days.(3) Low deficiencies must be corrected within 60 days.(b) HTC Development Owners are required by Treasury Regulation §1.42-5 to report (through the Annual Owner's Compliance Report) any local health, safety, or building code violations. HTC Developments that fail to comply with local codes shall be reported to the IRS.(c) The Department is required to report any HTC Development that fails to comply with any requirements of the NSPIRE or local codes at any time during the compliance period to the IRS on IRS Form 8823. Accordingly, the Department will submit IRS Form 8823 for any NSPIRE violation.(d) Acceptable evidence of correction of deficiencies is a certification from an appropriate licensed professional that the item now complies with the inspection standard or other documentation that will allow the Department to reasonably determine when the repair was made and whether the repair sufficiently corrected the violation(s) of NSPIRE standards. Acceptable documentation includes: copies of work orders (listing the deficiency, action taken or repairs made to correct the deficiency, date of corrective action, and signature of the person responsible for the correction), invoices (from vendors, etc.), or other proof of correction. Photographs are not required but may be submitted if labeled and only in support of a work order or invoice. The Department will determine if submitted materials satisfactorily document correction of noncompliance.(e) Selection of Units for Inspection.(1) Vacant Units will not be inspected (alternate Units will be selected) if a Unit has been vacant for fewer than 30 days.(2) Units vacant for more than 30 days are assumed to be ready for occupancy and may be inspected. No deficiencies will be cited for inspectable items that require utility service, if utilities are turned off and the inspectable item is present and appears to be in working order.(f) The Department will consider a request for review of a NSPIRE score using a process similar to the process established by the U. S. Department of Housing and Urban Development Real Estate Assessment Center. The request must be submitted in writing within 45 calendar days of receiving the initial NSPIRE inspection report and score. The request must be accompanied by evidence that supports the claim, which if corrected will result in a significant improvement in the overall score of the property. Upon receipt of this request from the Owner the Department will review the inspection and evidence. If the Department's review determines that an objectively verifiable and material error (or errors) or adverse condition(s) beyond the Owner's control has been documented and that it is likely to result in a significant improvement in the Development's overall score, the Department will take one or a combination of the following actions:(1) Undertake a new inspection;(2) Correct the original inspection; or(3) Issue a new physical condition score.(g) The responsibility rests with the Owner to demonstrate that an objectively verifiable and material error (or errors) or adverse conditions occurred in Department's inspection through submission of materials, which if corrected will result in a significant improvement in the Development's overall score. To support its request for a technical review of the physical inspection results, the Owner may submit photographic evidence, written material from an objective source with subject matter expertise that pertains to the item being reviewed such as a local fire marshal, building code official, registered architect, or professional engineer, or other similar third party-documentation.(h) Examples of items that can be adjusted include, but are not limited to:(1) Building Data Errors--The inspection includes the wrong building or a building that is not owned by the Development.(2) Unit Count Errors--The total number of units considered in scoring is incorrect as reported at the time of the inspection.(3) Non-Existent Deficiency Errors--The inspection cites a deficiency that did not exist at the time of the inspection.(4) Local Conditions and Exceptions--Circumstances include inconsistencies between local code requirements and the NSPIRE inspection protocol, such as conditions permitted by local variance or license (e.g., child guards allowed on sleeping room windows by local building codes) or preexisting physical features that do not conform to or are inconsistent with the Department's physical condition protocol.(5) Ownership Issues--Items that were captured and scored during the inspection that are not owned and not the responsibility of the Development. Examples include sidewalks, roads, fences, retaining walls, and mailboxes owned and maintained by adjoining properties or the city/county/state and resident-owned appliances that are not maintained by the Owner. However, if the Owner has an agreement with the city/county/state for the responsibility of maintenance on accessible routes including sidewalks, then the Owner will be responsible for any repairs.(6) Modernization Work In Progress--Developments undergoing extensive modernization work in progress, underway at the time of the physical inspection, may qualify for an adjustment. All elements of the Unit that are not undergoing modernization at the time of the inspection (even if modernization is planned) will be subject to the Department's physical inspection protocol without adjustment. Any request for a technical review process for modernization work in progress must include proof the work was contracted before any notice of inspection was issued by the Department.(i) Examples of items that cannot be adjusted include, but are not limited to: (1) Deficiencies that were repaired or corrected during or after the inspection; or(2) Deficiencies recorded with no associated point loss (for example, inoperable smoke detectors) or deficiencies for survey purposes only (for example, fair housing accessibility).(j) All Life-Threatening and Severe deficiencies must be corrected within 24 hours. Project Owner's Certification That All Life Threatening and Severe Deficiencies Have Been Corrected must be completed and uploaded to CMTS within 72 hours (three Department business days).10 Tex. Admin. Code § 10.621
The provisions of this §10.621 adopted to be effective November 28, 2013, 38 TexReg 8410; Adopted by Texas Register, Volume 44, Number 06, February 8, 2019, TexReg 0560, eff. 2/11/2019; Amended by Texas Register, Volume 47, Number 43, October 28, 2022, TexReg 7271, eff. 11/3/2022; Amended by Texas Register, Volume 49, Number 08, February 23, 2024, TexReg 1065, eff. 2/26/2024