Section 1340-03-06-.16 - FINANCIAL RESPONSIBILITY REQUIREMENTS(1) The manufacturer shall maintain comprehensive general liability insurance in the amount of at least one million dollars ($1,000,000.00) per occurrence with a three million dollar ($3,000,000.00) aggregate total liability that shall cover defects or problems with product design and materials; workmanship during manufacture; and BAIID calibration, installation, use, and removal. The manufacturer shall provide the Ignition Interlock Program written notice forty-five (45) days prior to cancellation, material change, or lapse of the insurance policy.(2) The service center shall maintain comprehensive general liability insurance in the amount of at least one hundred thousand dollars ($100,000.00) per occurrence with a three hundred thousand dollar ($300,000.00) aggregate total liability that shall cover defects or problems with the BAIID calibration, installation, use, and removal. The manufacturer shall provide the Ignition Interlock Program written notice forty-five (45) days prior to cancellation, material change, or lapse of the insurance policy held by any of its service centers.Tenn. Comp. R. & Regs. 1340-03-06-.16
Original rule filed December 17, 2012; effective May 31, 2013. Rule was previously numbered 1340-03-06-.14 but was renumbered 1340-03-06-.16 with the introduction of new rules 1340-03-06-.04 and 1340-03-06-.14 filed February 19, 2020; effective May 19, 2020. Amendments filed February 19, 2020; effective 5/19/2020.Authority: T.C.A. §§ 4-3-2009, 55-10-412, 55-10-417, and 55-10-425.