Current through October 22, 2024
Section 0400-45-08-.09 - POINTS OF WITHDRAWAL AND RETURN LOCATION/SOURCE IDENTIFICATION(1) The point(s) of withdrawal and return shall be located at a minimum using any one of the following methods: (a) Located on a 7.5 minute USGS topographic map.(b) Coordinates obtained with a GPS unit (in decimal format).(c) The name of the stream or river and river mile from the mouth of the river as shown on a 7.5 minute USGS topographic map.(d) The name of the municipal or industrial wastewater plant.(e) The name of the source and county where the intake, well or spring is located and the name of the source or discharge point and county where water is returned. Water returned through multiple private subsurface disposal systems only have to identify the county where the discharge takes place.(2) State Driller Tag Number or other State Identification Number, if one has been assigned or public water system (PWS) entry point ID.(3) Multiple points of withdrawal may be further identified and designated as W1, W2, W3 and so forth for reporting purposes. Multiple points of return may be further identified as R1, R2, R3, and so forth.Tenn. Comp. R. & Regs. 0400-45-08-.09
Original rule filed June 18, 2012; effective September 16, 2012.Authority: T.C.A. §§ 69-7-301 et seq., and 4-5-201 et seq.