Tenn. Comp. R. & Regs. 0400-45-08-.07

Current through October 22, 2024

Section 0400-45-08-.07 - MEASUREMENT METHODS AND STANDARDS

The commissioner shall accept a recognized method of measuring the quantities of water withdrawn. Recognized methods of measuring the quantity of surface water withdrawn which are acceptable include any of the following:

(1) Flow meters accurate to within ten percent of calibration in accordance with the manufacturer's recommendations;

(2) The rated capacity of the pump in conjunction with the use of an hour meter, electric meter or log;

(3) Any standard or method employed by the United States Geological Survey in determining water withdrawals;

(4) Any other method found to provide reliable water withdrawal data approved by the Department. Any person desiring to use an alternate method of measuring the volume of water withdrawal shall make a written request to the department. The request must describe the procedure to be used and furnish information on the accuracy of the method.

Tenn. Comp. R. & Regs. 0400-45-08-.07

Original rule filed June 18, 2012; effective September 16, 2012.

Authority: T.C.A. §§ 69-7-301 et seq., and 4-5-201 et seq.