S.D. Admin. R. 74:56:03:04

Current through Register Vol. 51, page 71, January 6, 2025

Section 74:56:03:04 - General requirements for AST systems

General requirements for AST systems are as follows:

(1) Owners or operators of new AST systems located at facilities of 250,000 gallons total capacity or less must implement one or more of the following requirements:

(a) Meet performance standards for new AST systems as specified in § 74:56:03:07 and have overfill control as specified in subdivision 74:56:03:13(2);

(b) Meet secondary containment requirements specified in § 74:56:03:11 or 74:56:03:12, whichever is applicable; or

(c) Meet release detection requirements specified in § 74:56:03:19;

(2) Owners or operators of any existing AST systems located at facilities of 250,000 gallons total capacity or less must implement one or more of the requirements specified in subdivision (1) of this section by November 30, 1992;

(3) Owners or operators of new AST systems located at facilities of over 250,000 gallons total capacity must comply with the requirements specified in subdivision (1) of this section;

(4) Owners or operators of any existing AST systems located at facilities of over 250,000 gallons total capacity must comply with the requirements specified in subdivision (1) of this section by November 30, 1992;

(5) By November 30, 1990, AST systems constructed of metal and installed in contact with an electrolyte must be cathodically protected with sacrificial anodes or an impressed current system which is designed, fabricated, and installed in accordance with codes of practice developed by nationally recognized associations or independent testing laboratories, such as NACE Standard RP-02-85 (1985), NACE Standard RPO169-83 (1983), or API Standard 1632 (1983) or similar methods approved by the department;

(6) AST systems must comply with all applicable local ordinances.

S.D. Admin. R. 74:56:03:04

14 SDR 76, effective 11/29/1987; 18 SDR 62, effective 10/10/1991; transferred from

General Authority: SDCL 34A-2-93, 34A-2-101.

Law Implemented: SDCL 34A-2-100, 34A-2-101.

NACE Standard RP-02-85, 1985 Revision, National Association of Corrosion Engineers. Copies may be obtained from the National Association of Corrosion Engineers, P.O. Box 218340, Houston, Texas 77218-8340. Cost: $10 for members and $12 for nonmembers. NACE Standard RP0169-83, 1983 Revision, National Association of Corrosion Engineers. Copies may be obtained from the National Association of Corrosion Engineers, P.O. Box 218340, Houston, Texas 77218-8340. Cost: $10 for members and $12 for nonmembers. API Standard 1632, 1983 edition, American Petroleum Institute, as reprinted by the Harco Corrosion Engineering and Cathodic Protection Library, HC-64. Copies may be obtained from the American Petroleum Institute, Publications and Distribution Section, 1220 L Street, Northwest, Washington, D.C. 20005-4070. Cost: $12.50.