S.D. Admin. R. 44:90:03:08

Current through Register Vol. 51, page 51, October 21, 2024

Section 44:90:03:08 - Cannabis product manufacturing facility operating procedures - Additional requirements

The operating procedures for a cannabis product manufacturing facility must provide the department with sufficient detail to determine the establishment's compliance with this article and SDCL chapter 34-20 G, including:

(1) A description of the classes of products that will be manufactured by the establishment;

(2) A detailed description of the manufacturing processes that will occur on the premises, including:

(a) Mechanical extraction using potable water, ice, dry screening or sieving, cryonic extraction, pressure, or temperature;

(b) Infusion into propylene glycol, glycerin, or food-grade fats;

(c) Extraction using food-grade ethanol; and

(d) Extraction using an inherently hazardous substance;

(3) Detailed plans for remediating cannabis on behalf of a cannabis cultivation facility, specifying the steps to be taken by type of test failed;

(4) Detailed plans for remediating cannabis products, specifying the steps to be taken by product type and by type of test failed;

(5) A diagram illustrating in which areas of the premises each manufacturing activity will occur;

(6) A diagram illustrating the areas of the premises where any solvent, chemical, or potentially hazardous substance will be stored, excluding water;

(7) Plans for ventilation and filtration systems that reduce the risk of fire or respiratory harm within the facility;

(8) Documentation from an engineer licensed pursuant to SDCL chapter 36-18 A or a state or local official authorized to certify compliance that the equipment used for cannabis extraction and the location of the equipment comply with all applicable safety standards contained in local ordinance, SDCL chapter 11-10, article 61:15, and chapter 20:44:22; and

(9) Documentation from the manufacturer of the cannabis extraction system or an engineer licensed pursuant to SCDL chapter 36-18 A showing that a professional grade, closed-loop extraction system that recovers the solvents used to produce cannabis extract is used by the establishment.

S.D. Admin. R. 44:90:03:08

48 SDR 040, effective 10/5/2021

General Authority: SDCL 34-20G-72(2)(5).

Law Implemented: SDCL 34-20G-55(1), 34-20G-72(5).