S.D. Admin. R. 20:18:17:17

Current through Register Vol. 50, page 159, June 17, 2024

Section 20:18:17:17 - Slot machine specifications - Tilt conditions - Clearing by attendant

Slot machines must be capable of detecting and displaying the following tilt conditions which an attendant may clear:

(1) Coin-in jam;

(2) Coin-out jam;

(3) Hopper empty or timed-out;

(4) RAM error;

(5) Program error;

(6) Hopper runaway or extra coin paid out;

(7) Reverse coin-in;

(8) Reel spin error of any type, including a mis-index condition for mechanical reels. The specific reel number must be identified in the error indicator;

(9) In the final positioning of a reel, if the position error exceeds one-half of the width of the smallest symbol including blanks on the reel strip;

(10) Low RAM battery, for batteries external to the RAM itself, or low power source;

(11) Program error or authentication mismatch;

(12) Stacker full. (The bill acceptor must disable itself to accept no more bills. The slot machine may not generate an explicit, stacker full, error message when the stacker is full); and

(13) Paper low.

A description of slot machine error codes in § 20:18:17:16 and this section and the meanings of such error codes must be affixed inside the slot machine. Hard meter readings must be recorded if the RAM is cleared.

S.D. Admin. R. 20:18:17:17

16 SDR 57, effective 10/1/1989; 16 SDR 233, effective 7/1/1990; 16 SDR 57, effective 7/1/1991; 27 SDR 53, effective 12/4/2000; 28 SDR 24, effective 8/28/2001; 36 SDR 22, effective 8/18/2009.

General Authority: SDCL 42-7B-7, 42-7B-11(13).

Law Implemented: SDCL 42-7B-4(21), 42-7B-7, 42-7B-11(13), 42-7B-14, 42-7B-17, 42-7B-43.