S.D. Admin. R. 20:10:39:30

Current through Register Vol. 50, page 159, June 17, 2024

Section 20:10:39:30 - Use of a milliammeter to conduct the cow contact test

When using an in-line milliammeter or a clamp-around milliammeter to measure current between contact points and one of those points is the floor surface or earth, the metal plate must make a high-quality conductive contact with the floor surface or earth, using the procedures described in § 20:10:39:31.

42 SDR 174, effective 6/21/2016

General Authority: SDCL 49-47-2.

Law Implemented: SDCL 49-47-2, 49-47-3.