S.D. Admin. R. 20:10:39:11

Current through Register Vol. 50, page 159, June 17, 2024

Section 20:10:39:11 - Calibration of measuring equipment

All measuring equipment must be calibrated according to the manufacturer's recommended calibration schedule, but no less than annually, to meet the manufacturer's specifications for the accuracy and resolution of the equipment. Measuring equipment may not be used after its next "calibration due" date for measurements or tests conducted during a stray voltage investigation. Calibration is performed by either:

(1) The manufacturer of the equipment, who shall certify that the equipment meets the manufacturer's specifications for accuracy and resolution; or

(2) A laboratory currently certified as meeting all applicable standards of the Institute of Electrical and Electronic Engineers and the International Organization for Standards.

S.D. Admin. R. 20:10:39:11

42 SDR 174, effective 6/21/2016

General Authority: SDCL 49-47-2.

Law Implemented: SDCL 49-47-2, 49-47-3.