S.D. Admin. R. 20:01:06:09

Current through Register Vol. 51, page 57, November 12, 2024

Section 20:01:06:09 - Zero tolerance requirement

All weighing and measuring equipment placed in service by a service agent or service agency shall be set as close to zero tolerance as possible.

S.D. Admin. R. 20:01:06:09

7 SDR 14, effective 8/21/1980; 12 SDR 151, 12 SDR 155, effective 7/1/1986; 43 SDR 56, effective 10/17/2016

General Authority: SDCL 37-21A-11.

Law Implemented: SDCL 37-21A-2, 37-21A-5 to 37-21A-7.