Current through Register Vol. 48, No. 10, October 25, 2024
A. Landscape Architect shall not affix, or permit to be affixed, his/her name or seal to any drawing, specification, or other document which was not prepared by him/her or under his/her personal supervision. No registrant shall affix his/her seal to any drawings, specification, or other document in physical or electronic format unless the licensee has assumed the responsibility for the accuracy of the contract documents involved. Seals shall be signed by the responsible landscape architect. B. Seals must meet the following specifications:1. The seal shall be circular in shape and one and three quarter (1 3/4) inches in diameter.2. Concentric with the outside of the seal there shall be a circle one and three sixteenths (1 3/16) inches in diameter.3. For individual seals wording shall be as follows: In the annular space between the circle and the outside of the seal shall be the words "State of South Carolina" on the top and the name of only one (1) licensee on the bottom. The words "Licensed Landscape Architect" and the license number of only one (1) individual shall be placed within the inner circle.4. For the certificate of authorization seals the wording shall be as follows: In the annular space between the circle and the outside of the seal shall be the words "State of South Carolina" on the top and "COA" on the bottom. The name and Certificate of Authorization number of only one (1) firm shall be placed within the inner circle.Added by State Register Volume 36, Issue No. 2, eff February 24, 2012; State Register Volume 47, Issue No. 05, eff. 5/26/2023.