S.C. Code Regs. § § 61-62.5.4.VIII
E = (F) 4.10 P0.67
and interpolation and extrapolation of the data for process weight rates greater than 30 tons per hour shall be accomplished by using the equation:
E = (F) (55.0 P0.11 -40)
Where E = the allowable emission rate in pounds per hour,
P = process weight rate in tons per hour.
F = effect factor from Table B.
TABLE A | |||
ALLOWABLE RATE OF EMISSION BASED ON PROCESS WEIGHT RATE [FN*] | |||
PROCESS WEIGHT RATE (Tons/Hour) | RATE OF EMISSION (Pounds/Hour) | PROCESS WEIGHT RATE (Tons/Hour) | RATE OF EMISSION (Pounds/Hour) |
0.05 | 0.551 | 8 | 16.5 |
0.10 | 0.877 | 9 | 17.9 |
0.20 | 1.40 | 10 | 19.2 |
0.30 | 1.83 | 15 | 25.2 |
0.40 | 2.22 | 20 | 30.5 |
0.50 | 2.58 | 25 | 35.4 |
0.75 | 3.38 | 30 | 40.0 |
1.00 | 4.10 | 35 | 41.3 |
1.25 | 4.75 | 40 | 42.5 |
1.50 | 5.38 | 45 | 43.6 |
1.75 | 5.96 | 50 | 44.6 |
2.00 | 6.52 | 60 | 46.3 |
2.50 | 7.58 | 70 | 47.8 |
3.00 | 8.56 | 80 | 49.0 |
3.50 | 9.49 | 100 | 51.2 |
4.00 | 10.4 | 500 | 69.0 |
4.50 | 11.2 | 1000 | 77.6 |
5.00 | 12.0 | 3000 | 92.7 |
TABLE B | |
EFFECT FACTOR FOR PARTICULATE MATTER EMISSIONS [FN**] (TO BE USED WITH STANDARD 4--Section VIII) | |
MATERIAL | EFFECT FACTOR (F) |
a. All materials not specifically listed hereunder b. Elements and their compounds on the basis of the element contained therein [FN***] c. Specific Materials: Acid Mists | 1.0 none assigned 0.25 |
[FN*] Please note that certain small operations may not require a permit (see exemptions under Regulation 62-1, Section II). | |
[FN**] The Board will make additions to this table as required from time to time to preserve public health and property in South Carolina. | |
[FN***] When a material contains two or more elements, the effect factor of the element having the lowest effect factor shall apply. | |
S.C. Code Regs. § 61-62.5.4.VIII