S.C. Code Regs. § § 61-62.5.5.2.VI

Current through Register Vol. 48, No. 9, September 27, 2024

Section 61-62.5.5.2.VI - NOTIFICATION REQUIREMENTS FOR EXISTING AFFECTED SOURCES

(A) Burner Assembly Replacement Notifications for Existing Affected Sources

(1) Except for those affected sources that wish to request an alternative control methodology as specified in Section V(C) above, the notification requirements specified in this section shall apply only to existing affected sources as defined in Section I(A)(2) above where an existing burner assembly is replaced after the effective date of this regulation.

(2) Within seven (7) days of replacing an existing burner assembly, the owner or operator shall submit written notification to register the replacement unit with the Department.

(3) Notification shall satisfy the permitting requirements consistent with Regulation 61-62.1, Section II(a).

(4) Notification shall contain replacement unit information as requested in the format provided by the Department. Replacement unit information shall include, at a minimum, all affected units at the source and the date the replacement unit(s) commenced operation.

(5) Those affected sources that wish to receive an emission reduction credit for the control device will be required to submit a permit application prior to replacement of the burner assembly(s).

S.C. Code Regs. § 61-62.5.5.2.VI

Amended by State Register Volume 40, Issue No. 06, eff. 6/24/2016; State Register Volume 44, Issue No. 04, eff. 4/24/2020.