S.C. Code Regs. § § 61-107.279.F.55

Current through Register Vol. 48, No. 10, October 25, 2024

Section 61-107.279.F.55 - Analysis Plan

Owners or operators of used oil processing and re-refining facilities must develop and follow a written analysis plan describing the procedures that will be used to comply with the analysis requirements of 279.53 and, if applicable, 279.72. The owner or operator must keep the plan at the facility.

a. At a minimum, the plan must specify the following:

(1) Whether sample analyses or knowledge of the halogen content of the used oil will be used to make this determination.

(2) If sample analyses are used to make this determination:

(a) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:

(i) One of the sampling methods in Appendix I of R.61-79.261; or

(ii) A method shown to be equivalent under R.61-79.260.20 and 260.21;

(b) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and

(c) The methods used to analyze used oil for the parameters specified in 279.53; and

(3) The type of information that will be used to determine the halogen content of the used oil.

b. At a minimum, the plan must specify the following if 279.72 is applicable:

(1) Whether sample analyses or other information will be used to make this determination;

(2) If sample analyses are used to make this determination:

(a) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:

(i) One of the sampling methods in Appendix I of R.61-79.261; or

(ii) A method shown to be equivalent under R.61-79.260.20 and 260.21;

(b) Whether used oil will be sampled and analyzed prior to or after any processing/re-refining;

(c) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and

(d) The methods used to analyze used oil for the parameters specified in 279.72; and

(3) The type of information that will be used to make the on-specification used oil fuel determination.

S.C. Code Regs. § 61-107.279.F.55

Added by State Register Volume 19, Issue No. 7, eff July 28, 1995.