Section 880-RICR-00-00-4.3 - Incorporation by ReferenceA. These regulations hereby adopt and incorporate 40 C.F.R § 403 (2018) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.B. These regulations hereby adopt and incorporate 14 C.F.R. § 77 (2011) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.C. These regulations hereby adopt and incorporate 33 C.F.R. § 105.275 (2018) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.D. These regulations hereby adopt and incorporate 33 C.F.R. § 136 (2018) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.E. These regulations hereby adopt and incorporate "Rhode Island Department of Transportation, Standard Specifications for Road and Bridge Construction" (2013) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.F. These regulations hereby adopt and incorporate the "Rhode Island Department of Environmental Management's Rhode Island Soil and Sediment Control Handbook" (2016) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.G. These regulations hereby adopt and incorporate the "National Fire Protection Association 291, Recommended Practice for Fire Flow Testing and Marking of Hydrants" (2016) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.H. These regulations hereby adopt and incorporate the "American Standard for Nursery Stock Z60.1" (2004) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.I. These regulations hereby adopt and incorporate the "Institute of Transportation Engineers Parking Generation, 4th Edition" (2010) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.J. These regulations hereby adopt and incorporate the "Water Pollution Control Federation's Manual of Practice No. 9, Design and Construction of Sanitary and Storm Sewers" (1986) by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations.K. These regulations hereby adopt and incorporate the following "International Organization for Standardization (ISO)" by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations: 1. Fire Suppression Rating Schedule (2012)2.8179-1, Ductile Iron Pipes, Fittings, Accessories and Their Joints, External Zinc-Based Coating, Part 1: Metallic Zinc with Finishing Layer" (2017)L. These regulations hereby adopt and incorporate the following "Illuminating Engineering Society (IES)" standards by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations. 1. The Lighting Handbook (2011)2. Lighting for Exterior Environments RP- 33-14 and Lighting for Parking Facilities RP- 20-14(2014)M. These regulations hereby adopt and incorporate the following "American National Standard Institute (ANSI)" standards by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations. 1. S1.4, American National Standard Electroacoustics - Sound Level Meters, Part 1 (2014)2. S12.51, Acoustics - Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Presser (2012)N. These regulations hereby adopt and incorporate the following "American Association of State Highway Transportation Officials" standards by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations. 1. M252, Standard Specification for Corrugated Polyethylene Drainage Pipe (2018)2. M294, Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12-to 60-in.) Diameter (2018)3. T99, Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg Rammer and a 305-mm Drop (2017)O. These regulations hereby adopt and incorporate the following "American Water Works Association (AWWA)" standards by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations:1. M31, Manual of Water Supply Practices Requirements for Fire Protection (1998)2. C909, Molecularly Oriented Polyvinyl Chloride Pressure Pipe, 4in. or Larger (2016),3. C502, Dry Barrel Fire Hydrant (2005)4. C800, Underground Service Line Valves and Fittings (2012)5. C900, Standard Test Method for Pullout Strength of Hardened Concrete (2015)6. C151/A21.51, Ductile-Iron Pipe, Centrifugally Cast (2017)7. C500, Metal-Seated Gate Valves for Water Supply Service (2009)8. C509, Resilient-Seated Gate Valves for Water Supply Service (2015)9. C504, Rubber-Seated Butterfly Valves (2015)10. C110/A21.10, Ductile-Iron and Gray Iron Fittings (2012)11. C111/A21.11, Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings (2017)12. C115/A21.15, Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges (2011)13. C150/A21.50, Thickness Design of Ductile-Iron Pipe (2014)14. C117/A21.4, Cement-Mortar Lining for Ductile-Iron Pipe and Fittings (2016)15. C905, Polyvinyl Chloride Pressure Pipe and Fabricated Fittings, 14 in. through 48 in. for Water Transmission and Distribution (2010)16. C901, Polyethylene Pressure Pipe and Tubing, 3/4 In. through 3 In. for Water Service (2017)17. C600, Standard Test Method of Thermal Shock Test on Glass Pipe (2015P. These regulations hereby adopt and incorporate the following "American Society for Testing and Materials (ASTM)" standards by reference, not including any further editions or amendments thereof and only to the extent that the provisions therein are not inconsistent with these regulations:1. D3139, Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals (2011)2. D3034, Standard Specification for Type PSM Poly (Vinyl Chloride) Sewer Pipe and Fittings (2016)3. F679, Standard Specification for Poly (Vinyl Chloride) Large-Diameter Plastic Gravity Sewer Pipe and Fittings (2016)4. F794, Standard Specification for Poly (Vinyl Chloride) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter (2014)5. F949, Standard Specification for Poly (Vinyl Chloride) Corrugated Sewer Pipe with a Smooth Interior and Fittings (2015)6. F949, Standard Specification for Poly (Vinyl Chloride) Compounds and Chlorinated Poly (Vinyl Chloride) (2011)7. D2444, Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) (2017)8. D2321, Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications (2018)9. D3212, Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals (2013)10. F477, Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe (2014)11. D1785, Standard Specification for Poly (Vinyl Chloride) Plastic Pipe, Schedules 40, 80 and 120 (2015)12. D2241, Standard Specification for Poly (Vinyl Chloride) Pressure-Rated Pipe (SDR Series) (2015)13. D3350, Standard Specification for Polyethylene Plastic Pipe and Fitting Materials (2014)14. C76, Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (2017)15. C507, Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (2018)16. C443, Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (2017)17. C877, Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (2016880 R.I. Code R. 880-RICR-00-00-4.3
Amended effective 11/27/2018