Current through December 3, 2024
Section 410-RICR-20-00-28.3 - Conducting the AuditA. The Board of Elections staff must establish a random seed to be used in conjunction with a pseudo-random number generator. The Board of Elections staff shall publish an announcement of the time and place of this event on the Open Meetings Portal of the Secretary of State's website, as well as the website of the Board of Elections. The seed is a number consisting of at least 20 digits, and each digit will be selected in order by sequential rolls of 10-sided dice. The Board of Elections staff will randomly select members of the public who attend the meeting to take turns rolling the 10-sided dice, and designate one or more staff members to take turns rolling the 10-sided dice in the event that not enough members of the public attend the meeting. In the event that an auxiliary stratum is used, the Board of Elections staff must use the same procedure to establish a random seed for that stratum. The Board of Elections staff must publish the seed(s) on the Audit Center immediately after the seed(s) are established.B. Board of Elections staff must enter the risk limit for each target contest, including unofficial final results for each target contest, into the RLA tool. If an auxiliary audit stratum is used, the unofficial final results entered into the RLA tool must exclude the ballots in the auxiliary audit stratum.C. A Board of Elections staff member must enter the target contest or contests into the RLA tool.D. A Board of Elections staff member must enter the ballot manifest into the RLA tool.E. A Board of Elections staff member must enter batch tallies into the RLA tool.F. A Board of Elections staff member must enter the number of batches initially to be audited into the RLA tool.G. A Board of Elections staff member must enter the random seed produced in § 28.3(A) of this Part into the RLA tool.H. If an auxiliary audit stratum is used, the Board of Elections staff must enter the target contest(s), the ballot manifest for this stratum, the unofficial final results in each target contest among ballots in this stratum, the number of ballot cards in this stratum initially to be audited, and the random seed for this stratum into the RLA tool.I. The RLA tool must randomly select and identify the batches of ballot cards, and the individual ballot cards in the auxiliary audit stratum if applicable, to audit by applying a publicly disclosed algorithm to the random seed(s) in conjunction with the ballot manifest(s) and batch tallies.J. The Board of Elections staff must publish on the Audit Center the information from the ballot manifest about the initial sample of batches of ballot cards before the audit teams begin auditing.K. As soon as possible after the selection of the initial audit sample, the Board of Elections staff must retrieve the batches selected for audit from the local boards, following all prescribed chain of custody procedures. The Board of Elections staff must post an announcement of the time and place for the review and tallying of the audit sample by the audit teams on the Open Meetings Portal of the Secretary of State's website, as well as the website of the Board of Elections. The notice shall include a link to the livestream of the audit if one is being provided.L. All batches of ballot cards selected for the audit pursuant to § 28.3(I) of this Part, and (if applicable) all ballot cards that comprise the auxiliary audit stratum, must remain within view of the public observation area at all times.M. If an auxiliary audit stratum is used, one or more audit teams must manually count or use a digital counting scale to retrieve the ballot cards to be audited in that stratum, within view of the public observation area.N. Within view of the public observation area, any time a batch of ballots is opened or closed, the Board of Elections staff or designees must show that the seals on the appropriate storage containers are those recorded on the applicable chain of custody forms as prescribed by the Board of Elections staff.O. Within view from the public observation area, at least two members of the Board of Elections staff or designees may divide batches of ballots into sub-batches. If an auxiliary audit stratum is used, the ballot cards to be audited in that stratum may be treated as one batch or divided into sub-batches.P. Board of Elections staff or designees shall deliver to each audit team batches, or sub-batches of ballot cards, for auditing. Each member of the audit team must sign a form, as prescribed by the Board of Elections staff, acknowledging receipt of the batch or sub-batch of ballot cards.Q. The audit teams must examine each card in the batch, or sub-batch, of ballot cards. The audit team must interpret voter markings on ballot cards for audit in accordance with promulgated voter intent standards consistent with the Board of Elections' Voter Intent Guide. Each member of the audit team must call out in a loud and distinct voice, clear and audible, that must be able to be heard by those in the public observation area, their interpretation of the voter's selection, including over votes and under votes, for each audited contest, placing each audited ballot card in the appropriate pile.R. The public must be able to be close enough during the examination of the ballots to be able to see the voter markings so that they can evaluate for themselves whether the voter marking agrees with the audit team's interpretations of the voter's selection.S. If a batch or sub-batch contains a duplicate ballot, the audit team must interpret the voter markings on the ballot card marked as "ORIGINAL."T. When the audit team has finished examining all ballot cards in the batch, or sub-batch, they must tally the votes for each candidate or question in the contest and record the results, including any candidate or question that receives no votes, on a form as prescribed by the Board of Elections staff. The audit team shall use red pens to mark all forms, including tallies. Both members of the audit team must sign the form before returning the batch, or sub-batch, to the Board of Elections staff.U. If the audit team members cannot unanimously agree on the voter's intent for the contest being audited, they must place the ballot card in an envelope provided by the Board of Elections staff. Any ballots that the audit team cannot unanimously agree upon must be delivered to the review board.V. The review board will examine any cards submitted by the audit teams. If the review board, using the Voter Intent Guide, cannot unanimously agree on the voter's intent, a note must be made in the RLA tool or in the published results.W. Two members of the Board of Elections staff must enter the results of the audit team's tallies of the voter markings in the RLA tool. One member of the staff shall read out the tallies in a loud and distinct voice, clear and audible, that can be heard in the public observation area. The other shall repeat the tallies as the first staff member enters them into the RLA tool. The form and audit tool must be displayed so that they are clearly visible in the public observation area and, when feasible, on any livestream, if provided. If an auxiliary audit stratum is used, the staff members must enter tallies from this stratum separately from the other batch, or sub-batch, tallies, as prompted by the RLA tool. If there are any discrepancies in the tallies provided by the audit team, the batch or sub-batch may be retallied by the review board.X. When all of the batches, and ballot cards, identified for the audit have been examined and the results have been entered, the RLA tool will be used to determine if additional batches, or ballot cards, need to be audited. If the RLA tool indicates that the risk limit for the targeted contests is not met, the Board of Elections staff must randomly select additional batches of ballot cards (and, if applicable, additional ballot cards from the auxiliary audit stratum) for audit using the RLA tool. The RLA will continue until the risk limit for the targeted contest is met or until a full manual tally is completed.Y. The Board of Elections staff must post the results of the RLA on the Audit Center within two business days of completion of the RLA. The results report will contain:a. The name of the target contest or contests;b. For each contest: i. The number of winners;ii. The total number of ballot cards;iii. The unofficial final results;iv. The number of times batches were randomly selected for the audit;v. The number of batches in each sample; andvi. The corresponding batch identifiers (and, if applicable, the number of ballot cards sampled from the auxiliary audit stratum);c. The number of ballot cards audited in each batch and the audit tally totals;d. The measured risk for each audited contest; ande. An explanation of any discrepancies found during the audit.410 R.I. Code R. 410-RICR-20-00-28.3
Adopted effective 11/21/2024