Section 280-RICR-30-15-4.18 - SpeedometerA. Every cycle manufactured or equipped with a speedometer must be checked to ascertain whether the speedometer is in proper working order. When road checking the vehicle, observe the speed dial indicator to see if it is acting properly. The inspection station is not expected to be responsible for the calibration of the speedometer but you will be expected to reject a vehicle with an obvious defect.B. Cause for rejection: 1. A missing or inoperative speedometer;2. Broken or disconnected speedometer cables; or3. A dial indicator that does not move or act properly.280 R.I. Code R. 280-RICR-30-15-4.18