Section 250-RICR-120-05-5.5 - ApplicabilityA. This regulation shall apply, but not be limited to, the generation of airborne particulate matter from the following activities:1. The demolition, construction or renovation of buildings, bridges or other structures;2. Material stockpiles, including solid waste management facilities, and earth moving activities, including the clearing of land and other operations which cause airborne particulate matter;3. Stationary sources, as defined in Part 0 of this Subchapter (General Definitions) of this Subchapter, whose activities involve the handling of materials which cause airborne particulate matter;4. Exterior surface preparation/resurfacing operations conducted on buildings, bridges, or other structures that are not regulated by the requirements of Part 24 of this Subchapter (Removal of Lead Based Paint from Exterior Surfaces), as well as surface preparation/resurfacing operations conducted on vehicles, vessels, or any other surfaces which cause airborne particulate matter;5. Vehicles transporting materials which cause airborne particulate matter;6. Paved roads onto which earth or other material has been deposited by trucking or earth-moving equipment, by erosion by water, by the sanding and/or salting of roadways, or by other means;7. Commercial mining and/or quarrying operations including the construction, maintenance, and operation of a commercial mining and/or quarrying facility, as well as activities which involve the use of explosive materials which cause airborne particulate matter;8. Manufactured unwashed sand stockpiles that are located within one thousand five hundred (1,500) feet of any occupied dwelling structure; and,9. Any other activities or operations which the Director may determine cause airborne particulate matter.250 R.I. Code R. 250-RICR-120-05-5.5