Section 250-RICR-120-05-44.8 - Labeling RequirementsA. Each manufacturer of an adhesive, sealant, adhesive primer or sealant primer subject to this regulation shall display the following information on the product container or label: 1. A statement of the manufacturer's recommendation regarding thinning, reducing, or mixing of the product, provided that: a. This requirement does not apply to the thinning of a product with water; and b. If thinning of the product prior to use is not necessary, the statement must specify that the product is to be applied without thinning;2. The maximum or the actual VOC content of the product, as supplied, in grams of VOC per liter of product, calculated as specified in § 44.10 of this Part;3. The maximum VOC content of the product, as applied, in grams of VOC per liter of product, after thinning according to the manufacturer's maximum thinning recommendation.250 R.I. Code R. 250-RICR-120-05-44.8
Adopted effective 1/13/2019