216 R.I. Code R. 216-RICR-50-15-2.13

Current through December 3, 2024

Section 216-RICR-50-15-2.13 - Requirements for Radon Analytical Services

2.13.1Certification Requirements

A. In addition to the general requirements for all applicants, as listed in § 2.7 of this Part, the applicant for a radon analytical service must:

1. Provide documentation of successful completion of the EPA Radon Measurement Proficiency Program (RMP) for each primary testing device for which certification is desired.

2. Identify all personnel performing analysis or readings.

3. Provide the Department with a copy of the quality assurance and quality control procedures for each radon testing method established by the applicant.

4. Provide evidence of licensure as an analytical laboratory by the RIDOH in accordance with R.I. Gen. Laws Chapter 23-16.2 entitled "Laboratories" for the following methods:

a. Alpha Track Detectors

b. Charcoal Adsorption Devices

c. Charcoal Liquid Scintillation Devices

d. Continuous Radon Monitors

e. Electret Ion Chambers

2.13.2Performance Requirements

A. Radon analytical services must maintain a listing in the EPA Radon Measurement Proficiency Program (RMP) for each primary testing device for which certification is requested.

B. Analytical services certified in accordance with this Part must comply with any other applicable state and local licensing and/or certification requirements.

216 R.I. Code R. 216-RICR-50-15-2.13

Amended effective 1/1/2019