67 Pa. Code § 171.26

Current through Register Vol. 54, No. 37, September 14, 2024

Section 171.26 - Heating system

The chassis engine shall be equipped with plugged openings to supply hot water for the school bus heating system. The openings shall be suitable for attaching 3/4 inch pipe thread/hose connectors. The engine shall be capable of supplying water having a temperature of at least 170° F at a flow rate of 50 pounds/per minute at the return end of 30 feet of 1 inch inside diameter automotive hot water heater hose. See SBMI Standard No. 001 in Appendix A.

67 Pa. Code § 171.26

The provisions of this §171.26 adopted August 19, 1983, effective 8/20/1983, 13 Pa.B. 2561; readopted December 4, 1987, effective 12/5/1987, 17 Pa.B. 5052; amended September 13, 1996, effective 9/14/1996, 26 Pa.B. 4411.

The provisions of this §171.26 amended under the Vehicle Code, 75 Pa.C.S. §§ 4103, 4551-4553 and 6103.